Detection of Gaps in Concrete–Metal Composite Structures Based on the Feature Extraction Method Using Piezoelectric Transducers
Open Access
Abstract
A feature extraction methodology based on lamb waves is developed for the non-invasive detection and prediction of the gap in concrete–metal composite structures, such as concrete-filled steel tubes. A popular feature extraction method, partial least squares regression, is utilised to predict the gaps. The data is collected using the piezoelectric transducers attached to the external surface of the metal of the composite structure. A piezoelectric actuator generates a sine burst signal, which propagates along the metal and is received by a piezoelectric sensor. The partial least squares regression is performed on the raw sensor signal to extract features and to determine the relationship between the signal and the gap size, which is then used to predict the gaps. The applicability of the developed system is tested on two concrete-metal composite specimens. The first specimen consisted of an aluminium plate and the second specimen consisted of a steel plate. This technique is able to detect and predict gaps as low as 0.1 mm. The results demonstrate the applicability of this technique for the gap and debonding detection in concrete-filled steel tubes, which are critical in determining the degree of composite action between concrete and metal.Keywords
This publication has 43 references indexed in Scilit:
- Active Debonding Detection for Large Rectangular CFSTs Based on Wavelet Packet Energy Spectrum with PiezoceramicsJournal of Structural Engineering, 2013
- Active interface debonding detection of a concrete-filled steel tube with piezoelectric technologies using wavelet packet analysisMechanical Systems and Signal Processing, 2013
- Features for damage detection with insensitivity to environmental and operational variationsProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2012
- Effects of debonding on circular CFST stub columnsJournal of Constructional Steel Research, 2012
- Behavior of CFST short column and beam with initial concrete imperfection: ExperimentsJournal of Constructional Steel Research, 2011
- Principal Component Analysis of Acoustic Emission Signals From Landing Gear Components: An Aid to Fatigue Fracture DetectionStrain, 2011
- Guided wave propagation and spectral element method for debonding damage assessment in RC structuresJournal of Sound and Vibration, 2009
- Damage detection using piezoelectric transducers and the Lamb wave approach: II. Robust and quantitative decision makingSmart Materials and Structures, 2008
- Environmental Effects on Lamb Wave Responses from Piezoceramic SensorsMaterials Science Forum, 2003
- Lamb wave mode selection concepts for interfacial weakness analysisJournal of Nondestructive Evaluation, 1992