Magnetic Investigation of Cladded Nuclear Reactor Blocks
Open Access
Abstract
The wall, made of ferromagnetic steel, of a nuclear reactor pressure vessel is covered by an austenitic (very weakly ferromagnetic) cladding. In this work, we investigated how the base material and the cladding can be inspected separately from each other by nondestructive magnetic measurements. It was found that with the proper choice of the magnetizing yoke, these two different materials could be measured independently of each other. The effect of the yoke’s size was studied by the numerical simulation of magnetic flux, pumped into the material during magnetic measurements. Measurements were performed by two different sizes of yokes on pure base material, on base material under cladding and on cladding itself. Experiments verified the results of the simulation. Our results can help for the future practical application of magnetic methods in the regular inspection of nuclear power plants.Keywords
Funding Information
- EURATOM research and training programme 2014–2018 (755330)
This publication has 24 references indexed in Scilit:
- Nondestructive Magnetic Adaptive Testing of nuclear reactor pressure vessel steel degradationJournal of Nuclear Materials, 2012
- PERFORM 60: Prediction of the effects of radiation for reactor pressure vessel and in-core materials using multi-scale modelling – 60 years foreseen plant lifetimeNuclear Engineering and Design, 2011
- Magnetic measurements for evaluation of radiation damage on nuclear reactor materialsNuclear Engineering and Design, 2010
- Overview of reactor pressure vessel claddingInternational Journal of Nuclear Knowledge Management, 2010
- Monitoring the embrittlement of reactor pressure vessel steels by using the Seebeck coefficientJournal of Nuclear Materials, 2009
- Application of the Seebeck effect for monitoring of neutron embrittlement and low-cycle fatigue in nuclear reactor steelNuclear Engineering and Design, 2005
- Robust solutions of inverse problems in electromagnetic non-destructive evaluationInverse Problems, 2002
- Non-destructive evaluation of spheroidized steel using magnetoacoustic and Barkhausen emissionIEEE Transactions on Magnetics, 1997
- Nondestructive characterization of materials (ultrasonic and micromagnetic techniques) for strength and toughness prediction and the detection of early creep damageNuclear Engineering and Design, 1995
- The magnetic detection of material propertiesJOM, 1992