Properties and performance of sulfide‐substituted plasticized poly(vinyl chloride) as a biomaterial
Authors:
- 24 February 2003
- journal article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 65B (1) , 204-210
Abstract
Plasticized poly(vinyl chloride) (PVC) was surface modified by nucleophilic substitution of the chlorine atoms of PVC by sulfide ions in aqueous media in the presence of a phase‐transfer catalyst (PTC) to make it migration resistant. The modified PVC was sterilized by steam autoclaving and gamma radiation and subjected to plasticizer extraction in an extraction medium such as hexane. Virtually no plasticizer migrated out of modified PVC into the medium even after prolonged incubation for 30 d. The properties of the modified surface were evaluated by contact angle measurements, scanning electron microscopy (SEM), cell‐culture studies, hemolysis assay, and whole‐blood clotting time measurements. The mechanical properties of modified sheets were evaluated by measurements of tensile strength and strain at break after subjecting the specimens to different modes of sterilization. The modified PVC surface showed enhanced wettability and was found to be non‐hemolytic and non‐cytotoxic. Whole‐blood clotting profiles of unmodified and modified PVC were virtually the same. Modification imparted slight yellow color to the material. Surface modification resulted in an 8% decrease in the ultimate stress and 28% decrease in the strain at break values. The sulfide‐substituted PVC was found to be blood compatible and would be useful in applications such as tubing for transfusion, dialysis etc., where migration resistance is important. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 65B: 204–210, 2003Keywords
This publication has 22 references indexed in Scilit:
- Exposure of hemodialysis patients to di-2-ethylhexyl phthalateInternational Journal of Pharmaceutics, 1999
- Immobile plasticizer in flexible PVCNature, 1998
- Migration Resistant, Blood‐Compatible Plasticized Polyvinyl Chloride for [Medical and Related ApplicationsArtificial Organs, 1998
- Analysis of Potentially Toxic Phthalate Plasticizers Used in Toy ManufacturingBulletin of Environmental Contamination and Toxicology, 1998
- Di(2-ethylhexyl)phthalate as a plasticizer for intravenoous bags and tubing: A toxicological quandaryNutrition, 1997
- Phase transfer catalysed surface modification of plasticized poly(vinyl chloride) in aqueous media to retard plasticizer migrationPolymer, 1996
- NEWSThe Lancet, 1996
- Radiation grafting of hydrophilic monomers on to plasticized poly (vinyl chloride) sheetsBiomaterials, 1991
- Plasticized PVC films/petroleum oils: The effect of ultraviolet irradiation on plasticizer migrationJournal of Applied Polymer Science, 1991
- Toxicological Studies on Certain Medical Grade Plastics Sterilized by Ethylene OxideJournal of Pharmaceutical Sciences, 1968