Research on pressure loss calculation and determination of porous media resistance coefficients based on flow simulation of feed counterflow cooler
Authors:
- Jiayi LiJLJiayi Li
- Haiqing SiHSHaiqing Si
- Jingxuan QiuJQJingxuan Qiu
- Chaochao WuCWChaochao Wu
- Di ZhuangDZDi Zhuang
- 1 October 2024
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Abstract
In the feed industry, counterflow coolers are widely used cooling devices. The flow characteristics and pressure loss should be focused on during the design and optimization stages. Due to the complex accumulation of feed particles, it is difficult to accurately analyze the flow field behavior inside the cooler through experiments. Therefore, a detailed study was conducted with a cooler from Buhler using a simulation approach. First of all, the significant influence of the porous jump boundary of flap outlet in the simulation model on the flow field and temperature distribution was revealed. Second, limitations of the Ergun equation in estimating the drag coefficients of the porous medium and the porous jump boundary were explored. Finally, a rapid calculation model for pressure loss was established based on simulation data. Within a wide range of resistance coefficient inputs, the relative error between the model calculation and the corresponding simulation results is very small. Using this model to input a series of resistance coefficients, combined with a small number of overall pressure loss measurements for comparison, the resistance coefficient of the porous medium of the new material can be determined, solving the problem in determining this coefficient through typical measurement experiments at low flow velocity and the lack of effective estimation formulas. This research can provide practical references for improving cooling equipment and enhancing cooler efficiency, and the rapid calculation model can be extended to any fluid machinery containing porous media materials that satisfy Darcy–Forchheimer's law.Keywords
Funding Information
- the Fundamental Research Funds for the Central Universities (NS2022094)
- the state key laboratory of Mechanics and control for aerospace structures (MCAS-S-0224G03)
- The first batch of industry-university-research cooperative collaborative education projects of the Ministry of Education in 2021 (202101042005)
- the Experimental Technology Research and Development Project of Nanjing University of Aeronautics and Astronautics Project (SYJS202207Y)
- the Postgraduate Research & Practice Innovation Program of NUAA (xcxjh20232003)
This publication has 25 references indexed in Scilit:
- Natural Convection Through High Porosity Metal Foams—A Numerical Study2021
- Workflow for computational fluid dynamics modeling of fixed‐bed reactors packed with metal foam pellets: HydrodynamicsAIChE Journal, 2021
- Convection in Porous Media2017
- Comparison between Darcy and Brinkman laws in a fractureApplied Mathematics and Computation, 2012
- Particle-Based Methods2011
- Numerical investigation on the flow characteristics and permeability of three-dimensional reticulated foam materialsChemical Engineering Journal, 2008
- Effect of adsorbed water upon permeabilities of pressure-filtered ceramic nanopowder compactsJournal of Porous Materials, 2006
- Simulations of flow through open cell metal foams using an idealized periodic cell structureInternational Journal of Heat and Fluid Flow, 2003
- The Forchheimer equation: A theoretical developmentTransport in Porous Media, 1996
- The counterflow cooling of feed pelletsJournal of Agricultural Engineering Research, 1992