Optimization of the Carbon Content in Copper Phosphide–Carbon Composites for High Performance Sodium Secondary Batteries Using Ionic Liquids
- 27 May 2020
- journal article
- research article
- Published by Wiley in ChemElectroChem
- Vol. 7 (11) , 2477-2484
Abstract
Negative electrode materials with a large capacity and long cycle life are required for practical large‐scale sodium secondary batteries. Copper phosphide‐carbon composites containing various carbon contents were investigated for this purpose using an ionic liquid (IL) electrolyte. The composites were prepared by a two‐step high energy ball‐milling process: preparation of copper phosphide (CuP2) and composite formation between CuP2 and acetylene black (AB) at different ratios. A CuP2 to Cu3P phase transition was observed at AB contents of 30 and 40 wt%. The sample containing 30 wt% AB gave an optimal electrochemical performance (98.9 % capacity retention, 350 cycles, reversible capacity=358 mAh g−1 at 8000 mA g−1 and 90 °C), and upon cycling at 25 °C, a high capacity retention of 111 % was achieved (350 cycles). Ex situ XRD revealed the reversible conversion of Cu3P and the formation of Na3P during charging. The high performance was attributed to the P−O−C bond and the robust interfacial layer formed in the IL.Keywords
This publication has 81 references indexed in Scilit:
- Na2Ti3O7: an intercalation based anode for sodium-ion battery applicationsJournal of Materials Chemistry A, 2012
- Comparison of electrochemical performances of olivine NaFePO 4 in sodium-ion batteries and olivine LiFePO 4 in lithium-ion batteriesNanoscale, 2012
- Sodium‐Ion BatteriesAdvanced Functional Materials, 2012
- Effect of Mechanical Milling on Carbothermic Reduction of MagnesiaISIJ International, 2010
- Ionic-liquid materials for the electrochemical challenges of the futureNature Materials, 2009
- Building better batteriesNature, 2008
- Enhancement of Li-ion battery performance of graphite anode by sodium ion as an electrolyte additiveElectrochemistry Communications, 2003
- Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehiclesJournal of Power Sources, 2001
- Structural disorder and phase transformation in graphite produced by ball millingNanostructured Materials, 1996
- The Crystal Structures of CuP2 and AgP2 with some Phase Analytical Data of the Cu-P and Ag-P Systems.Acta Chemica Scandinavica, 1965