Emission characteristics during heating, evaporation, ignition and extinguishing of bitumen as a representative highly viscous liquid hydrocarbon
Authors:
- Svetlana KropotovaSKSvetlana Kropotova
- Vadim DorokhovVDVadim Dorokhov
- Pavel Aleksandrovich StrizhakPavel Aleksandrovich Strizhak
- Shamil KudashevSKShamil Kudashev
Preprint
- 28 July 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Accidents in storage tanks in oil refineries and chemical enterprises usually occur due to substantial volumes of flammable liquids, petroleum products, and fuels stored primarily in external floating roof tanks. It is vital to develop technologies and methods for predicting the consequences of industrial accidents in the incipient stages of a fire, specifically during the ignition. The paper reports experimental research findings on flue gas concentrations, when a fire involving a typical liquid hydrocarbon (bitumen) is suppressed using various types of gas-saturated compressed foam (air, nitrogen, carbon dioxide, and hydrate). An MRU MGA 5+ gas analyzer was used to record the composition of gases produced by bitumen heating, evaporation, thermal decomposition, combustion, and fire suppression. The experiments were carried out in 0.1-m3 and 0.4-m3 test tanks, with mineral wool used for thermal insulation of walls. Specific aspects of release of combustion product components were identified in relation to the control area location and temperatures. A multi-criteria analysis revealed that the efficiency factor of carbon dioxide and hydrate foams was comparable with a 10-12% difference depending on the priority given to foam application. Using firefighting foams containing an inert gas and CO2 hydrate increased the efficiency factor of foam application 1.5-5-fold compared to conventional compressed air foam. Relative indicators reflecting the greenhouse effects were calculated. A method for predicting the burnout time and required amount of extinguishing agent for industrial tank fire suppression was developed.Keywords
This publication has 29 references indexed in Scilit:
- Investigating radiation, toxic and hot gases fire hazards in large-scale storage tanks for oil derivatives with and without wind conditionsInternational Journal of Thermal Sciences, 2024
- Assessing the effects of fluorine-free and PFAS-containing firefighting foams on development and behavioral responses using a zebrafish-based platformChemosphere, 2024
- Tuning stability, rheology, and fire-extinguishing performance of advanced firefighting foam material by inorganic nanoparticle flame retardantsJournal of Colloid and Interface Science, 2024
- Insights from 665 tank farm fires—The second database updateProcess Safety Progress, 2023
- Bitumen fumes and PAHs in asphalt road paving: Emission characteristics, determinants of exposure and environmental impactEnvironmental Research, 2023
- Offshore field experiments with in-situ burning of oil: Emissions and burn efficiencyEnvironmental Research, 2022
- Mathematical modeling of toxic pollutants dispersion from large tank fires and assessment of acute effects for fire fightersInternational Journal of Heat and Mass Transfer, 2009
- Combustion Kinetics of Athabasca Bitumen from 1D Combustion Tube ExperimentsNatural Resources Research, 2009
- Numerical simulation of smoke plumes from large oil firesAtmospheric Environment, 1996
- Dispersion and deposition of smoke plumes generated in massive firesJournal of Hazardous Materials, 1993