Assessing the Contribution of the CFRP Strip of Bearing the Applied Load Using Near-Surface Mounted Strengthening Technique with Innovative High-Strength Self-Compacting Cementitious Adhesive (IHSSC-CA)
Open Access
Abstract
Efficient transfer of load between concrete substrate and fibre reinforced polymer (FRP) by the bonding agent is the key factor in any FRP strengthening system. An innovative high-strength self-compacting non-polymer cementitious adhesive (IHSSC-CA) was recently developed by the authors and has been used in a number of studies. Graphene oxide and cementitious materials are used to synthesise the new adhesive. The successful implementation of IHSSC-CA significantly increases carbon FRP (CFRP) strip utilization and the load-bearing capacity of the near-surface mounted (NSM) CFRP strengthening system. A number of tests were used to inspect the interfacial zone in the bonding area of NSM CFRP strips, including physical examination, pore structure analysis, and three-dimensional laser profilometery analysis. It was deduced from the physical inspection of NSM CFRP specimens made with IHSSC-CA that a smooth surface for load transfer was found in the CFRP strip without stress concentrations in some local regions. A smooth surface of the adhesive layer is very important for preventing localized brittle failure in the concrete. The pore structure analysis also confirmed that IHSSC-CA has better composite action between NSM CFRP strips and concrete substrate than other adhesives, resulting in the NSM CFRP specimens made with IHSSC-CA sustaining a greater load. Finally, the results of three-dimensional laser profilometery revealed a greater degree of roughness and less deformation on the surface of the CFRP strip when IHSSC-CA was used compared to other adhesives.Keywords
This publication has 13 references indexed in Scilit:
- Fatigue performance of NSM CFRP strips embedded in concrete using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxideComposite Structures, 2017
- Performance of RC beams rehabilitated with NSM CFRP strips using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxideComposite Structures, 2017
- Bond behaviour between NSM CFRP strips and concrete at high temperature using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxideConstruction and Building Materials, 2016
- Bond behaviour between NSM CFRP strips and concrete substrate using single-lap shear testing with cement-based adhesivesAustralian Journal of Structural Engineering, 2016
- A state-of-the-art review on roughness quantification methods for concrete surfacesConstruction and Building Materials, 2013
- Experimental and finite element analysis of flexural behavior of FRP-strengthened RC beams using cement-based adhesivesConstruction and Building Materials, 2012
- Influence of pozzolans and slag on the microstructure of partially carbonated cement paste by means of water vapour and nitrogen sorption experiments and BET calculationsCement and Concrete Research, 2010
- Correlation between concrete-to-concrete bond strength and the roughness of the substrate surfaceConstruction and Building Materials, 2007
- Mineral-Based Bonding of Carbon FRP to Strengthen Concrete StructuresJournal of Composites for Construction, 2007
- Bond characteristics of CFRP plated concrete members under elevated temperaturesComposite Structures, 2006