Compatibilization and Characterization of Polylactide and Biopolyethylene Binary Blends by Non-Reactive and Reactive Compatibilization Approaches
Open Access
Abstract
In this study, different compatibilizing agents were used to analyze their influence on immiscible blends of polylactide (PLA) and biobased high-density polyethylene (bioPE) 80/20 (wt/wt). The compatibilizing agents used were polyethylene vinyl acetate (EVA) with a content of 33% of vinyl acetate, polyvinyl alcohol (PVA), and dicumyl peroxide (DPC). The influence of each compatibilizing agent on the mechanical, thermal, and microstructural properties of the PLA-bioPE blend was studied using different microscopic techniques (i.e., field emission electron microscopy (FESEM), transmission electron microscopy (TEM), and atomic force microscopy with PeakForce quantitative nanomechanical mapping (AFM-QNM)). Compatibilized PLA-bioPE blends showed an improvement in the ductile properties, with EVA being the compatibilizer that provided the highest elongation at break and the highest impact-absorbed energy (Charpy test). In addition, it was observed by means of the different microscopic techniques that the typical droplet-like structure is maintained, but the use of compatibilizers decreases the dimensions of the dispersed droplets, leading to improved interfacial adhesion, being more pronounced in the case of the EVA compatibilizer. Furthermore, the incorporation of the compatibilizers caused a very marked decrease in the crystallinity of the immiscible PLA-bioPE blend.Keywords
Funding Information
- Ministerio de Ciencia e Innovación (MAT2017-84909-C2-2-R.)
This publication has 61 references indexed in Scilit:
- Fracture evaluation of plasticized polylactic acid / poly (3-HYDROXYBUTYRATE) blends for commodities replacement in packaging applicationsPolymer Testing, 2020
- Post-manufacture loading of filaments and 3D printed PLA scaffolds with prednisolone and dexamethasone for tissue regeneration applicationsEuropean Journal of Pharmaceutics and Biopharmaceutics, 2019
- Poly (lactic acid) blends: Processing, properties and applicationsInternational Journal of Biological Macromolecules, 2019
- Poly(lactic acid) formulations with improved toughness by physical blending with thermoplastic starchJournal of Applied Polymer Science, 2017
- The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blendsCarbohydrate Polymers, 2016
- Effect of miscibility on mechanical and thermal properties of poly(lactic acid)/ polycaprolactone blendsPolymer International, 2016
- Ternary PLA–PHB–Limonene blends intended for biodegradable food packaging applicationsEuropean Polymer Journal, 2014
- Experiencies in obtaining polymeric composites reinforced with natural fiber from EcuadorINGENIUS, 2013
- Characterization of PLA-limonene blends for food packaging applicationsPolymer Testing, 2013
- Mechanical, thermal, and biodegradability properties of PLA/modified starch blendsPolymer Composites, 2011