Fabrication, characterization, and performance evaluation of polyethersulfone/TiO2 nanocomposite ultrafiltration membranes for produced water treatment
- 11 July 2018
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 29 (10) , 2619-2631
Abstract
In the present work, development of neat and nanocomposite polyethersulfone membranes composed of TiO2 nanoparticles is presented. Membranes are fabricated using nonsolvent phase inversion process with the objective of improving antifouling, hydrophilicity, and mechanical properties for real and synthetic produced water treatment. Membranes are characterized using scanning electron microscopy, Fourier‐transform infrared, contact angle, porosity measurement, compaction factor, nanoparticles stability, and mechanical strength. The performance of prepared membranes was also characterized using flux measurement and oil rejection. Fourier‐transform infrared spectra indicated that noncovalence bond formed between Ti and polyethersulfone chains. The contact angle results confirmed the improved hydrophilicity of nanocomposite membranes upon addition of TiO2 nanoparticles owing to the strong interactions between fillers and water molecules. The increased water flux for nanocomposite membranes in comparison with neat ones can be due to coupling effects of improved surface hydrophilicity, higher porosity, and formation of macrovoids in the membrane structure. The membrane containing 7 wt% of TiO2 nanoparticles was the best nanocomposite membrane because of its high oil rejection, water flux, antifouling properties, and mechanical stability. The pure water flux for this membrane was twice greater than that of neat membrane without any loss in oil rejection. The hydrophilicity and antifouling resistance against oil nominates developed nanocomposite membranes for real and synthetic produced water treatment applications with high performance and extended life span.Keywords
This publication has 53 references indexed in Scilit:
- Produced water treatment technologiesInternational Journal of Low-Carbon Technologies, 2012
- TiO2 embedded mixed matrix PES nanocomposite membranes: Influence of different sizes and types of nanoparticles on antifouling and performanceDesalination, 2012
- Doping of polyethersulfone nanofiltration membranes: antifouling effect observed at ultralow concentrations of TiO2 nanoparticlesJournal of Materials Chemistry, 2011
- Gas separation membranes developed through integration of polymer blending and dual-layer hollow fiber spinning process for hydrogen and natural gas enrichmentsJournal of Membrane Science, 2010
- Impact of TiO2 nanoparticles on morphology and performance of crosslinked polyimide organic solvent nanofiltration (OSN) membranesJournal of Membrane Science, 2009
- Formation of appropriate sites on nanofiltration membrane surface for binding TiO2 photo-catalyst: Performance, characterization and fouling-resistant capabilityJournal of Membrane Science, 2009
- Preparation and properties of polysulfone/TiO2 composite ultrafiltration membranesJournal of Polymer Science Part B: Polymer Physics, 2006
- Visualization of the effect of die shear rate on the outer surface morphology of ultrafiltration membranes by AFMJournal of Membrane Science, 2002
- Infrared Absorption Spectra and Their Correlation with the Ti-O Bond Length Variations for TiO 2 (Rutile), Na-Titanates, and Na-Titanosilicate (Natisite, Na 2 TiOSiO 4 )Applied Spectroscopy, 1995
- Flux decline behaviour with low molecular weight solutes during ultrafiltration in an unstirred batch cellJournal of Membrane Science, 1992