The direct injection of liquid droplets into low pressure plasmas
Authors:
- 27 February 2009
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 27 (2) , 342-351
Abstract
A much greater number of useful precursors for plasma-enhanced chemical vapor deposition (PECVD) can be dispersed in high vapor pressure solvents than can be put into the vapor phase directly. In order to enable the use of such precursors, the authors investigated a method by which one can directly inject these liquids as microdroplets into low pressure PECVD environments. The solvent evaporates first leaving behind the desired precursor in the gas/plasma. The plasma dissociates the vapor and causes the deposition of a composite film (from precursor, solvent, and plasma gas). The authors made preliminary tests using Fe nanoparticles in hexane and were able to incorporate over 4% Fe in the resulting thin films. In addition, the authors simulated the process. The time required for a droplet to fully evaporate is a function of the background pressure, initial liquid temperature, droplet-vapor interactions, and initial droplet size. A typical evaporation time for a 50μm diameter droplet of hexane is ∼3s without plasma at 100mTorr. The presence of plasma can decrease the evaporation time by more than an order of magnitude. In addition, the model predicts that the temperature of the injected droplet first decreases by evaporative cooling (to ∼180K for hexane); however, once the solvent has fully evaporated/sublimated, the plasma heats any remaining solute. As a result the solute temperature can first fall to 180K, then rise to nearly 750K in less than 1s.Keywords
This publication has 20 references indexed in Scilit:
- Dust density effect on complex plasma decayPhysics Letters A, 2008
- A complex plasma device of large surface areaReview of Scientific Instruments, 2008
- Plasma enhanced liquid source MOCVD systemJournal of Physics: Conference Series, 2008
- A plasma process for the synthesis of cubic-shaped silicon nanocrystals for nanoelectronic devicesJournal of Physics D: Applied Physics, 2007
- Modelling of nanoparticle formation during spray pyrolysisNanotechnology, 2006
- Controlling the synthesis of TaC nanopowders by injecting liquid precursor into RF induction plasmaScience and Technology of Advanced Materials, 2005
- Electrical characterization of SrTiO3 thin films deposited on Si(001) substrate by liquid injection MOCVDMicroelectronic Engineering, 2004
- Chemical vapor deposition of ruthenium oxide thin films from Ru(tmhd)3 using direct liquid injectionThin Solid Films, 2002
- Preparation and properties of TiN and AlN films from alkoxide solution by thermal plasma CVD methodThin Solid Films, 2000
- Pulsed injection MOCVD of functional electronic oxidesAdvanced Materials for Optics and Electronics, 2000