Electrical Actuation of Coated and Composite Fibers Based on Poly[ethylene‐co‐(vinyl acetate)]
Open Access
- 16 November 2020
- journal article
- research article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 306 (2)
Abstract
Robots are typically controlled by electrical signals. Resistive heating is an option to electrically trigger actuation in thermosensitive polymer systems. In this study electrically triggerable poly[ethylene‐co‐(vinyl acetate)] (PEVA)‐based fiber actuators are realized as composite fibers as well as polymer fibers with conductive coatings. In the coated fibers, the core consists of crosslinked PEVA (cPEVA), while the conductive coating shell is achieved via a dip coating procedure with a coating thickness between 10 and 140 µm. The conductivity of coated fibers σ = 300–550 S m−1 is much higher than that of the composite fibers σ = 5.5 S m−1. A voltage (U) of 110 V is required to heat 30 cm of coated fiber to a targeted temperature of ≈ 65 °C for switching in less than a minute. Cyclic electrical actuation investigations reveal ε′rev = 5 ± 1% reversible change in length for coated fibers. The fabrication of such electro‐conductive polymeric actuators is suitable for upscaling so that their application potential as artificial muscles can be explored in future studies.Keywords
Funding Information
- Horizon 2020 (824074)
- Helmholtz-Gemeinschaft
This publication has 23 references indexed in Scilit:
- Shape Actuation via Internal Stress-Induced Crystallization of Dual-Cure NetworksACS Macro Letters, 2015
- Electrical conductivity and Joule heating of polyacrylonitrile/carbon nanotube composite fibersPolymer, 2014
- Conductive coatings with low carbon-black content by adding carbon nanofibersComposites Science and Technology, 2014
- Fibers Do the TwistScience, 2014
- Artificial Muscles from Fishing Line and Sewing ThreadScience, 2014
- Temperature-memory polymer actuatorsProceedings of the National Academy of Sciences, 2013
- A review of stimuli-responsive shape memory polymer compositesPolymer, 2013
- Torsional Carbon Nanotube Artificial MusclesScience, 2011
- Effect of filler dispersion degree on the Joule heating stimulated recovery behaviour of nanocompositesJournal of Materials Science, 2010
- Electroactivate shape-memory polymer filled with nanocarbon particles and short carbon fibersApplied Physics Letters, 2007