Printed Thick Film Resistance Temperature Detector for Real-Time Tube Furnace Temperature Monitoring
Open Access
Abstract
Accurately acquiring crucial data on tube furnaces and real-time temperature monitoring of different temperature zones is vital for material synthesis technology in production. However, it is difficult to achieve real-time monitoring of the temperature field of tube furnaces with existing technology. Here, we proposed a method to fabricate silver (Ag) resistance temperature detectors (RTDs) based on a blade-coating process directly on the surface of a quartz ring, which enables precise positioning and real-time temperature monitoring of tube furnaces within 100–600 °C range. The Ag RTDs exhibited outstanding electrical properties, featuring a temperature coefficient of resistance (TCR) of 2854 ppm/°C, an accuracy of 1.8% FS (full scale), and a resistance drift rate of 0.05%/h over 6 h at 600 °C. These features ensured accurate and stable temperature measurement at high temperatures. For demonstration purposes, an array comprising four Ag RTDs was installed in a tube furnace. The measured average temperature gradient in the central region of the tube furnace was 5.7 °C/mm. Furthermore, successful real-time monitoring of temperature during the alloy sintering process revealed approximately a 20-fold difference in resistivity for silver-palladium alloys sintered at various positions within the tubular furnace. The proposed strategy offers a promising approach for real-time temperature monitoring of tube furnaces.Keywords
Funding Information
- National Key Research and Development Program of China (2021YFB3200701, 62101469)
- National Natural Science Foundation of China (2021YFB3200701, 62101469)
This publication has 46 references indexed in Scilit:
- Parthenium hysterophorus derived nanostructures as an efficient carbocatalyst for the electrochemical sensing of mercury(II) ionsChemosphere, 2024
- 3D printing of high-temperature thick film platinum resistance temperature detector arrayAdditive Manufacturing, 2023
- Analysis of the Annealing Budget of Metal Oxide Thin‐Film Transistors Prepared by an Aqueous Blade‐Coating ProcessAdvanced Functional Materials, 2022
- Abnormal Graphitization Behavior in Near‐Surface/Interface Region of Polymer‐Derived CeramicsSmall, 2022
- Fabrication of Flexible High‐Temperature Film Thermometers and Heat‐Resistant OLEDs Using Novel Hot Exciton Organic FluorophoresAdvanced Functional Materials, 2022
- Fabrication Techniques for Curved Electronics on Arbitrary SurfacesAdvanced Materials Technologies, 2020
- Synthesis of PVZ glass and its improvement on mechanical and electrical properties of low temperature sintered silver pasteJournal of Materials Science: Materials in Electronics, 2020
- Influence of a heterolayered Al2O3–ZrO2/Al2O3 ceramic protective overcoat on the high temperature performance of PdCr thin film strain gaugesCeramics International, 2019
- Nanocomposite thin films based on Au-Ag nanoparticles embedded in a CuO matrix for localized surface plasmon resonance sensingApplied Surface Science, 2019
- Synthesis of nanocrystalline TaC powders via single-step high temperature spray pyrolysis from solution precursorsCeramics International, 2017