Using an induction coil sensor to indirectly measure the B -field response in the bandwidth of the transient electromagnetic method
- 1 January 2000
- journal article
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 65 (5) , 1489-1494
Abstract
The traditional sensor used in transient electromagnetic (EM) systems is an induction coil. This sensor measures a voltage response proportional to the time rate of change of the magnetic field in the EM bandwidth. By simply integrating the digitized output voltage from the induction coil, it is possible to obtain an indirect measurement of the magnetic field in the same bandwidth. The simple integration methodology is validated by showing that there is good agreement between synthetic voltage data integrated to a magnetic field and synthetic magnetic-field data calculated directly. Further experimental work compares induction-coil magnetic-field data collected along a profile with data measured using a SQUID magnetometer. These two electromagnetic profiles look similar, and a comparison of the decay curves at a critical point on the profile shows that the two types of measurements agree within the bounds of experimental error. Comparison of measured voltage and magnetic-field data show that the two sets of profiles have quite different characteristics. The magnetic-field data is better for identifying, discriminating, and interpreting good conductors, while suppressing the less conductive targets. An induction coil is therefore a suitable sensor for the indirect collection of EM magnetic-field data.Keywords
This publication has 15 references indexed in Scilit:
- Field trials using HTS SQUID magnetometers for ground-based and airborne geophysical applicationsIEEE Transactions on Applied Superconductivity, 1999
- The use of B-field measurements in an airborne time-domain system – Part II: examples in conductive regimesExploration Geophysics, 1998
- Integrated interpretation of SPECTREM geophysical dataExploration Geophysics, 1998
- Potential use of high Tc SQUIDS for airborne electromagneticsExploration Geophysics, 1998
- The use of B-field measurements in an airborne time-domain system: Part I. Benefits of B-field versusdB/dtdataExploration Geophysics, 1998
- Application of an improved technique for interpreting transient electromagnetic dataExploration Geophysics, 1998
- Fast Approximate Inversion of Tem DataExploration Geophysics, 1997
- Resistive-limit, time-domain AEM apparent conductivityGeophysics, 1996
- Conductivity-Depth Transform of GEOTEM DataExploration Geophysics, 1995
- An improved pulse transient airborne electromagnetic system for locating good conductorsGeophysics, 1976