Bubble size analysis in a two-phase countercurrent flow in the narrow rectangular column
- 1 April 2022
- journal article
- conference paper
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (4) , 043305
Abstract
The flow of bubbles in a two-phase system has great implications in chemical, petrochemical, and biochemical applications. This work enunciates the measurement of bubble size distribution and bubble aspect ratio in three-different axial zones in the countercurrent flow mode with a gas and liquid velocity range of 0.044–0.321 and 0.019–0.058 m/s, respectively. Bubble size is measured by the photographic technique. The bubble aspect ratio and bubble size distribution results reveal that the impact of gas and liquid velocities is significant on the Sauter mean bubble size. The Sauter mean bubble size increases as the gas velocity increases, whereas it decreases with the liquid velocity. The Sauter mean bubble diameter ranges from 2.65 to 6.16 mm. The distribution of bubble sizes follows the LogLogistic probability density function. In addition, a correlation is also proposed for the interpretation of bubble diameter in terms of Reynolds number and Froude number. The bubble aspect ratio changes with axial zones and gas and liquid velocities. Experiments reveal that the bubble aspect increases with liquid velocity while decreasing with gas velocity and axial zones. The bubble aspect ratio correlations are developed in terms of Eötvös and Reynolds numbers. The present results will be helpful for the process intensification of bubble-aided two-phase flow applications.Keywords
This publication has 59 references indexed in Scilit:
- On stability of a bubble columnChemical Engineering Research and Design, 2013
- On the deformation of gas bubbles in liquidsPhysics of Fluids, 2012
- Ultra fast electron beam X-ray computed tomography for two-phase flow measurementNuclear Engineering and Design, 2010
- Interfacial area and mass transfer in carbon dioxide absorption in TEA aqueous solutions in a bubble column reactorChemical Engineering and Processing - Process Intensification, 2010
- A Review on Flow Regime Transition in Bubble ColumnsInternational Journal of Chemical Reactor Engineering, 2007
- Shape of a Newtonian liquid drop moving through an immiscible quiescent non-Newtonian liquidChemical Engineering and Processing - Process Intensification, 2003
- Temperature effect on single bubble rise characteristics in stagnant distilled waterInternational Journal of Heat and Mass Transfer, 2003
- Experimental determination of bubble size distributions in bubble columns: prediction of mean bubble diameter and gas hold upPowder Technology, 1999
- Interpolation formula for computing the velocities of single gas bubbles in liquidsChemistry and Technology of Fuels and Oils, 1970
- Shape of liquid drops moving in liquid mediaAIChE Journal, 1966