Effect of interfacial chemistry on crystallization of polypropylene/multiwall carbon nanotube nanocomposites
- 21 June 2019
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 59 (8) , 1570-1584
Abstract
This study systematically investigates the polymer–carbon nanotube (CNT) interaction when the interphase is tailored. Maleic anhydride‐grafted‐polypropylene (MA‐g‐PP) or polypropylene (PP) was noncovalently coated onto acid functionalized multiwall nanotube (f‐MWNT) through solution mixing. These coated f‐MWNTs were melt microcompounded with neat PP to form PP/f‐MWNT nanocomposites. The effects of functional groups and the thin layer of solution processed polymers, namely, MA‐g‐PP or PP, at the PP/f‐MWNT interface on crystallization and on melting behavior of matrix PP were investigated. The results were compared with a pristine MWNT (p‐MWNT) incorporated system. It was shown that PP coated CNTs can serve as a strong nucleating agent for templated polymer crystal growth. Unlike other PP nanocomposites in the literature, a relatively high shift of 7°C in melting peak maximum (Tp), along with a sharp melt endotherm was achieved with the addition of 0.3 wt% f‐MWNT via PP/f‐MWNT master batch. This indicates refinement of matrix PP crystalline region due to the tailored f‐MWNT surface chemistry. With a designed self‐seeding and templated crystal growth approach, columnar crystalline interphases were found surrounding MWNT which melted at 10.5°C higher temperature than neat PP crystallized without undergoing the same heat treatment protocol. POLYM. ENG. SCI., 59:1570–1584 2019. © 2019 Society of Plastics EngineersKeywords
This publication has 62 references indexed in Scilit:
- Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallizationProgress in Polymer Science, 2012
- Properties of microinjection molding of polymer multiwalled carbon nanotube conducting compositesPolymer Engineering & Science, 2011
- Nanocomposites of Carbon Nanotube Fibers Prepared by Polymer CrystallizationACS Applied Materials & Interfaces, 2010
- Shaping Polymer Particles by Carbon NanotubesMacromolecular Rapid Communications, 2008
- DSC isothermal polymer crystallization kinetics measurements and the use of the Avrami equation to fit the data: Guidelines to avoid common problemsPolymer Testing, 2007
- Crystallization and melting of bulk polymers: New observations, conclusions and a thermodynamic schemeProgress in Polymer Science, 2006
- Equilibrium Melting Temperature of Isotactic Polypropylene with High Tacticity: 1. Determination by Differential Scanning CalorimetryMacromolecules, 2003
- Crystallization and orientation studies in polypropylene/single wall carbon nanotube compositePolymer, 2003
- Surface electronic structure study of Au/Si(111) reconstructions: Observation of a crystal-to-glass transitionPhysical Review B, 2002
- Lamellar Thickening in Isotactic Polypropylene with High Tacticity Crystallized at High TemperatureMacromolecules, 2000