Implant isolation of GaAs-AlGaAs heterojunction bipolar transistor structures

Authors:

Abstract
The formation of high‐resistivity (>107Ω/⧠) regions in GaAs‐AlGaAs heterojunction bipolar transistor (HBT) structures by oxygen and hydrogen ion implantation has been investigated as a function of ion dose and subsequent annealing temperature (400–700 °C). Isolation leakage currents as low as 8 μA mm−1 at 6 V can be achieved between 100‐μm‐wide ohmic contacts separated by a 16 μm spacing. The isolation of these 1.8‐μm‐thick heterojunctions requires up to six different energy oxygen implants (40–400 keV) and three different energy proton implants (100–200 keV) with doses in the mid 1012 cm−2 range for O+ and 5×1014 cm−2 for H+ ions. Similar results can be achieved by substituting a MeV energy oxygen implant for the proton implants. The optimum post‐implant annealing temperature depends on the ion dose but is in the range 500–600 °C. The evolution of the sheet resistance of the implanted GaAs‐AlGaAs material with annealing is consistent with a reduction in tunneling probabilities of trapped carriers between deep level states for temperatures up to ∼600 °C, followed by significant annealing of these deep levels. Small geometry (2×9 μm2) HBTs exhibiting current gain of 44 and cutoff frequency fT as high as 45 GHz are demonstrated using implant isolation.

This publication has 14 references indexed in Scilit: