A 3-D-Printed Multibeam Dual Circularly Polarized Luneburg Lens Antenna Based on Quasi-Icosahedron Models forKa-Band Wireless Applications
- 2 April 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (8) , 5807-5815
Abstract
This paper presents a multibeam dual circularly polarized (CP) Luneburg Lens (LL) antenna based on quasi-icosahedron (QICO) models. The lens is sliced into multiple shells and each shell comprises of several triangular unit cells, and then the permittivity variation is achieved by manipulating the wall thickness of each triangular unit cells after the QICO discretization. Such a QICO model is firstly proposed to be used in LL design, which not only makes the lens mechanically robust and manufacturing-friendly (no support is needed in the processing) but also enables the antenna to be polarization-insensitive and thus can sustain CP beams very well. A wideband ridged waveguide feed is selected to initiate left-handed CP (LHCP) and right-handed CP (RHCP) beams simultaneously. To prove the concept, a prototype was fabricated using 3D-Printing (3DP) technologies. The measurement results reveal an overlapped bandwidth of 33.1% (26.5 GHz – 37 GHz) in terms of reflection coefficients lower than -10 dB and axial ratios smaller than 3 dB. Five LHCP and five RHCP beams with gains of 19-21.2 dBic and couplings lower than –20 dB are also demonstrated.Keywords
Funding Information
- Singapore National Research Foundation National Additive Manufacturing Innovation Cluster (2019064)
- National Research Foundation through the Virtual Singapore Program (NRF2017VSG-AT3DCM001-038)
- National Science Foundation of Jiangsu Province, China (BK20191184)
This publication has 40 references indexed in Scilit:
- MIMO Precoding and Combining Solutions for Millimeter-Wave SystemsIEEE Communications Magazine, 2014
- Technological Process to Control the Foam Dielectric Constant Application to Microwave Components and AntennasIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!IEEE Access, 2013
- A plate Luneberg lens with the permittivity distribution controlled by hole densityElectronics and Communications in Japan (Part I: Communications), 2002
- Nonuniform Luneburg and two-shell lens antennas: radiation characteristics and design optimizationIEEE Transactions on Antennas and Propagation, 2001
- Effective medium theories for artificial materials composed of multiple sizes of spherical inclusions in a host continuumIEEE Transactions on Antennas and Propagation, 1999
- Pattern optimization of a reflector antenna with planar-array feeds and cluster feedsIEEE Transactions on Antennas and Propagation, 1997
- Ridge waveguide polarizer with finite and stepped-thickness septumIEEE Transactions on Microwave Theory and Techniques, 1995
- Simplified design procedures for Butler matrices incorporating 90° hybrids or 180° hybridsIEE Proceedings H Microwaves, Antennas and Propagation, 1987
- The design of radially symmetric lensesIEEE Transactions on Antennas and Propagation, 1970