Analyzing the impact of curved tracks on wheel flange thickness reduction in railway systems
Open Access
- 1 January 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 14 (1)
Abstract
Flanges are critical parts of railway wheels that guide the wheels on the track and prevent them from derailing. However, curved tracks have a great influence on wheel flange wear, which leads to increased maintenance costs, passenger discomfort, poor ride quality, and increased noise and vibrations. This research aims to analyze the effect of curved tracks on wheel flange thickness reduction using the multi-body simulation software SIMPACK. The wheel flange wear was calculated to determine how much material is lost in terms of the area of material loss for different curve radii of 50, 100, and 200 m. The obtained results show that at curved track sections of smaller radius, for example, 50 m, the occurrence of wheel flange thickness reduction is higher than that of curved track sections with larger radii. Also, high speeds such as 40 km/h, especially at the track curved sections with small radii, lead to an increase in wheel flange thickness reduction compared to track curved sections with large radii. The results of wear indices obtained using SIMPACK and VAMPIR closely matched with a small percentage error difference of 1.94%. The matching of these results validated the effectiveness of the methods used in this research to calculate wear. Therefore, these conclusions will assist maintenance personnel in developing countermeasures to minimize wheel flange thickness reduction, ensure proper re-profiling, and reduce maintenance costs.Keywords
This publication has 55 references indexed in Scilit:
- Carbody abnormal lateral vibration failure of high–speed train induced by the coupling factor of the wheel re–profiling method and excessive rail wearEngineering Failure Analysis, 2024
- Simulation of wheel and rail profile wear: a review of numerical modelsRailway Engineering Science, 2022
- Railway wheel profile fine-tuning system for profile recommendationRailway Engineering Science, 2021
- Optimizing wheel profiles and suspensions for railway vehicles operating on specific lines to reduce wheel wear: a case studyMultibody System Dynamics, 2020
- Rail Vehicle Dynamics2017
- Influence of heavy haul railway curve parameters on rail wearEngineering Failure Analysis, 2015
- Optimization of rail profile to reduce wear on curved trackInternational Journal of Precision Engineering and Manufacturing, 2013
- A new method for modelling and simulation of the dynamic behaviour of the wheel-rail contactInternational Journal of Automation and Computing, 2012
- A study on wear evaluation of railway wheels based on multibody dynamics and wear computationMultibody System Dynamics, 2010
- Wheel-rail rolling contact theoryWear, 1991