Fiber-matrix interface improvement via glycidyl methacrylate compatibilization for rotomolded poly(lactic acid)/agave fiber biocomposites
- 30 July 2020
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 55 (2) , 201-212
Abstract
The growing interest in research and development of eco-friendlier materials makes attractive the use of bio-based and biodegradable polymers such as polylactic acid (PLA). However, the higher cost of PLA compared to conventional polymers limits its applications. Moreover, raw materials for rotational molding must be in a powder form, which further increases their cost. So, the main objective of this study was to use agave fibers to produce lower-cost PLA based rotomolded biocomposites (BC) without compromising its bio-sourced origin and to compare with a standard rotomolding resin: linear medium density polyethylene (LMDPE). To improve the fiber-matrix interface, a chemical surface treatment of the fibers with glycidyl methacrylate grafted polylactic acid (GMA-g-PLA) in solution was evaluated. The results showed that a better biocomposites’ morphology was obtained, especially with the fibers treated twice. The surface treatment was also shown to substantially improve the flexural and tensile properties of treated fiber biocomposites at higher fiber content (25% wt.) compared to those with untreated fiber. The surface treatment also led to a substantial reduction of the biocomposites porosity and water absorption. Overall, the samples were shown to have better mechanical properties than neat LMDPE while being eco-friendlier due to their bio-nature.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación (481448, 742432)
- Consejo Estatal de Ciencia y Tecnología de Jalisco (8107-2019)
This publication has 34 references indexed in Scilit:
- Mechanical and thermal characterization of sisal fiber reinforced polylactic acid compositesPolymers for Advanced Technologies, 2018
- Effect of Maleated PLA on the Properties of Rotomolded PLA-Agave Fiber BiocompositesJournal of Polymers and the Environment, 2018
- Improved thermal and mechanical performance of ramie fibers reinforced poly(lactic acid) biocomposites via fiber surface modifications and composites thermal annealingPolymer Composites, 2018
- Wood flour reinforced biodegradable PBS/PLA compositesJournal of Composite Materials, 2018
- Effect of fiber content and surface treatment on the mechanical properties of natural fiber composites produced by rotomoldingComposite Interfaces, 2016
- Modification of wood flour/PLA composites by reactive extrusion with maleic anhydrideJournal of Applied Polymer Science, 2015
- The influence of Spartium junceum L. fibres modified with montmorrilonite nanoclay on the thermal properties of PLA biocompositesComposites Part B: Engineering, 2015
- Preparation and properties of L‐lactide‐grafted sisal fiber–reinforced poly(lactic acid) compositesPolymer Composites, 2014
- Effect of fiber surface treatments on the properties of short sisal fiber/poly(lactic acid) biocompositesPolymer Composites, 2012
- Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie compositesComposites Part A: Applied Science and Manufacturing, 2010