Enhancing tensile properties and suppressing porosity in laser beam welding aluminum alloys via novel oscillation technology
Authors:
- Jinglong TangJTJinglong Tang
- Jie SuJSJie Su
- Jiaqi SunJSJiaqi Sun
- Minglie HuMHMinglie Hu
- Zhen LuoZLZhen Luo
Preprint
- 12 July 2024
- preprint
- Published by Springer Nature in Research Square
Abstract
Al-Mg alloys are highly susceptible to porosity and elemental evaporation during laser beam welding, resulting in softening of the joints and jeopardizing engineering applications. Oscillating laser bean welding (OLBW) can significantly improve the mechanical properties of the joint by stirring the molten pool to refine the weld grain and suppress porosity. A novel “W” shaped oscillating trajectory was used to couple the laser beam welding in this article, and the OLBW process was systematically investigated to derive the corresponding process window. Meanwhile, based on the optimized process, the effect of oscillation frequency on weld porosity, weld grain morphology and tensile properties were investigated by this paper. The results indicated that the increase in oscillation frequency contributed to the elimination of porosity in the weld, which was less than 0.1% at oscillation frequencies between 2 Hz and 8 Hz. Increasing the oscillation frequency, the tensile strength and elongation increased accordingly, and when the oscillation frequency was 8 Hz, the tensile strength of the weld was 176 MPa, which can reach 85.8% of the base metal. This study further elucidates the mechanism of inhibition of porosity and enhancement of tensile properties by OLBW, with a view to providing guidance for subsequent OLBW of aluminum alloys.Keywords
All Related Versions
This publication has 24 references indexed in Scilit:
- Effect of laser-arc synergy on melting energy in laser-CMT hybrid welding of aluminum alloyOptik, 2023
- Parameter optimization for laser welding of dissimilar aluminum alloy: 5052-H32 and 6061-T6 considering wobbling techniqueThe International Journal of Advanced Manufacturing Technology, 2021
- Laser wobble welding of fluid-based cooling channel joining for battery thermal managementJournal of Manufacturing Processes, 2021
- Investigate on the porosity morphology and formation mechanism in laser-MIG hybrid welded joint for 5A06 aluminum alloy with Y-shaped grooveJournal of Manufacturing Processes, 2020
- Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayerJournal of Manufacturing Processes, 2019
- Macro-micro modeling and simulation on columnar grains growth in the laser welding pool of aluminum alloyInternational Journal of Heat and Mass Transfer, 2018
- Effect of oxygen addition on microstructures and mechanical properties of Ti-7.5Mo alloyJournal of Alloys and Compounds, 2018
- Study on insufficient fusion of NG-GMAW for 5083 Al alloyThe International Journal of Advanced Manufacturing Technology, 2017
- Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloysInternational Journal of Heat and Mass Transfer, 2017
- Numerical simulation of keyhole behaviors and fluid dynamics in laser–gas metal arc hybrid welding of ferrite stainless steel platesJournal of Manufacturing Processes, 2017