Asymmetric collapse of offshore pipelines under external pressure
Authors:
- 1 April 2013
- journal article
- research article
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 8 (2) , 176-188
Abstract
There exists inevitably various geometric imperfections in offshore pipelines in the manufacturing process. In deep waters, the pipes have to withstand high external hydrostatic pressure, in general, which is a dominant parameter for the design of such structures. A 2D theoretical formulation is presented to predict the collapse pressure of elastic–plastic tubes with arbitrary initial geometric imperfections represented by the ovality and wall thickness variations. In addition, numerical simulations are also carried out using a 3D finite-element model within the framework of ABAQUS. Close agreement between the results validates the effectiveness of this theoretical method. Then, the theoretical model is applied to study the effects of some important parameters such as diameter-to-thickness ratio, initial ovality, wall thickness variations and material properties, etc., on the collapse pressure of the pipes. Based upon extensive parametric studies, a few significant conclusions are drawn, which aim to provide the theoretical basis for design of offshore pipelines with various initial geometric imperfections and material properties.Keywords
This publication has 20 references indexed in Scilit:
- Buckling response of offshore pipelines under combined tension and bendingSTRUCTURAL ENGINEERING AND MECHANICS, 2012
- Buckling response of offshore pipelines under combined tension, bending, and external pressureJournal of Zhejiang University-SCIENCE A, 2011
- Effect of thickness variation on collapse pressure of seamless pipesOcean Engineering, 2010
- On the effect of narrow and long corrosion defects on the collapse pressure of pipelinesApplied Ocean Research, 2009
- On the effect of corrosion defects on the collapse pressure of pipelinesInternational Journal of Solids and Structures, 2007
- Asymmetric Collapse Modes of Pipes under Combined Bending and External PressureJournal of Engineering Mechanics, 2000
- On the localization of collapse in cylindrical shells under external pressureInternational Journal of Solids and Structures, 1993
- On the collapse of inelastic tubes under combined bending and pressureInternational Journal of Solids and Structures, 1988
- Response and stability of elastoplastic circular pipes under combined bending and external pressureInternational Journal of Solids and Structures, 1982
- The plastic buckling of long cylindrical shells under pure bendingInternational Journal of Solids and Structures, 1980