Volume‐of‐fluid‐based model for multiphase flow in high‐pressure trickle‐bed reactor: Optimization of numerical parameters
- 28 August 2009
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 55 (11) , 2920-2933
Abstract
Aiming to understand the effect of various parameters such as liquid velocity, surface tension, and wetting phenomena, a Volume‐of‐Fluid (VOF) model was developed to simulate the multiphase flow in high‐pressure trickle‐bed reactor (TBR). As the accuracy of the simulation is largely dependent on mesh density, different mesh sizes were compared for the hydrodynamic validation of the multiphase flow model. Several model solution parameters comprising different time steps, convergence criteria and discretization schemes were examined to establish model parametric independency results. High‐order differencing schemes were found to agree better with the experimental data from the literature given that its formulation includes inherently the minimization of artificial numerical dissipation. The optimum values for the numerical solution parameters were then used to evaluate the hydrodynamic predictions at high‐pressure demonstrating the significant influence of the gas flow rate mainly on liquid holdup rather than on two‐phase pressure drop and exhibiting hysteresis in both hydrodynamic parameters. Afterwards, the VOF model was applied to evaluate successive radial planes of liquid volume fraction at different packed bed cross‐sections. © 2009 American Institute of Chemical Engineers AIChE J, 2009Keywords
This publication has 35 references indexed in Scilit:
- Volume of fluid methods for immiscible-fluid and free-surface flowsChemical Engineering Journal, 2008
- Numerical simulation of film boiling on a sphere with a volume of fluid interface tracking methodInternational Journal of Heat and Mass Transfer, 2008
- Multiphase catalytic reactors: a perspective on current knowledge and future trendsCatalysis Reviews, 2002
- Comparison of CFD simulations to experiment for convective heat transfer in a gas–solid fixed bedChemical Engineering Journal, 2001
- High-Pressure Trickle-Bed Reactors: A ReviewIndustrial & Engineering Chemistry Research, 1997
- Newtonian drop impact with a solid surfaceAIChE Journal, 1995
- The hysteretic behavior of pressure drop and liquid holdup in trickle bedsAIChE Journal, 1988
- The hydrodynamics of trickling flow in packed beds. Part II: Experimental observationsAIChE Journal, 1986
- Prediction of the particle-laden jet with a two-equation turbulence modelInternational Journal of Multiphase Flow, 1984
- Trickle‐bed reactors: A reviewAIChE Journal, 1983