Safety assessment of the process Technoplastika Prima Perdana, based on Starlinger deCON technology, used to recycle post-consumer PET into food contact materials
Authors:
- Vittorio SilanoVSVittorio Silano
- José Manuel Barat BavieraJBJosé Manuel Barat Baviera
- Claudia BolognesiCBClaudia Bolognesi
- Andrew ChessonACAndrew Chesson
- Pier Sandro CocconcelliPCPier Sandro Cocconcelli
- Riccardo CrebelliRCRiccardo Crebelli
- David Michael GottDGDavid Michael Gott
- Konrad GrobKGKonrad Grob
- Claude LambréCLClaude Lambré
- Marcel MengelersMMMarcel Mengelers
- Alicja MortensenAMAlicja Mortensen
Open Access
- 1 July 2020
- journal article
- research article
- Published by Wiley in EFSA Journal
- Vol. 18 (7) , e06186
Abstract
The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Technoplastika Prima Perdana (EU register number RECYC185), which uses the Starlinger deCON technology. The input material is hot washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post-consumer PET containers, e.g. bottles, including no more than 5% PET from non-food consumer applications. The flakes are preheated before being submitted to solid-state polycondensation (SSP) in a continuous reactor at high temperature under vacuum and gas flow. Having examined the challenge test provided, the Panel concluded that the preheating (step 2) and the decontamination in the continuous SSP reactor (step 3) are critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of these critical steps are temperature, pressure, residence time and gas flow rate. It was demonstrated that this recycling process is able to ensure a level of migration of potential unknown contaminants into food below the conservatively modelled migration of 0.1 mu g/kg food. Therefore, the Panel concluded that the recycled PET obtained from this process is not considered to be of safety concern, when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs for long-term storage at room temperature, with or without hot-fill. Trays made of this recycled PET are not intended to be used in microwave and conventional ovens and such uses are not covered by this evaluation. (C) 2020 European Food Safety Authority. EFSA Journal published by John Wiley and Sons Ltd on behalf of European Food Safety Authority.Keywords
This publication has 3 references indexed in Scilit:
- Scientific Opinion on the criteria to be used for safety evaluation of a mechanical recycling process to produce recycled PET intended to be used for manufacture of materials and articles in contact with foodEFSA Journal, 2011
- Guidance of the Scientific Committee on Transparency in the Scientific Aspects of Risk Assessments carried out by EFSA. Part 2: General PrinciplesEFSA Journal, 2009
- Guidelines on submission of a dossier for safety evaluation by the EFSA of a recycling process to produce recycled plastics intended to be used for manufacture of materials and articles in contact with food ‐ Opinion of the Scientific Panel on food additives, flavourings, processing aids and materials in contact with food (AFC)EFSA Journal, 2008