Substrate Effects on Light-Off - Part II Cell Shape Contributions
Author:
- 24 February 1997
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
In the preceding paper the specific heat capacity, substrate heat capacity, and energy requirements of two types of substrates were discussed in detail both from the standpoint of predictions from measured material property values as well as actual energy measurements on ceramic and metal products. This information is valuable for the catalyst designer because of the light-off impact of this energy requirement. Some material was also presented regarding the change in this energy requirement with washcoat loading. Other aspects of the substrate which could reasonably come into play to enhance the light-off characteristics of a catalyst are the rates of heat and mass transfer. The latter of these could reasonably be expected to drive the catalyst activity. In addition, the pressure drop which results from the substrate structure could influence and limit the choice of cell configurations and product shapes and sizes, thereby constraining the list of possible options. These three features - heat transfer, mass transfer, and pressure drop - can all be dealt with by considering the shape of the cell and its impact on the relevant parameters. As with the previous paper, these features will be discussed against the backdrop of the square and sinusoidal cell structures which are available on the market today.Keywords
This publication has 16 references indexed in Scilit:
- Substrate Effects on Light-Off - Part I Thermal Energy RequirementsSAE International Journal of Advances and Current Practices in Mobility, 1996
- Analysis of Catalyst Durability Data from the Standpoint of Substrate Surface AreaSAE International Journal of Advances and Current Practices in Mobility, 1995
- High Temperature Ultra Stable Close-Coupled CatalystsSAE International Journal of Advances and Current Practices in Mobility, 1995
- Improved Cell Design for Increased Catalytic Conversion EfficiencySAE International Journal of Advances and Current Practices in Mobility, 1994
- Study of Ceramic Catalyst Optimization for Emission Purification EfficiencySAE International Journal of Advances and Current Practices in Mobility, 1994
- Technique for the Analysis of FTP EmissionsSAE International Journal of Advances and Current Practices in Mobility, 1992
- The Design of Automotive Catalyst Supports for Improved Pressure Drop and Conversion EfficiencySAE International Journal of Advances and Current Practices in Mobility, 1991
- The Development and Application of a Metal Supported Catalyst for Porsche's 911 Carrera 4SAE International Journal of Advances and Current Practices in Mobility, 1989
- Cell Design for Ceramic Monoliths for Catalytic Converter ApplicationSAE International Journal of Advances and Current Practices in Mobility, 1988
- Metal Supports for Exhaust Gas CatalystsSAE International Journal of Advances and Current Practices in Mobility, 1985