A Theoretical Analysis of Mixed Lubrication by Macro Micro Approach: Part I—Results in a Gear Surface Contact
Authors:
- 1 January 2000
- journal article
- conference paper
- Published by Taylor & Francis in Tribology Transactions
- Vol. 43 (4) , 689-699
Abstract
Mixed lubrication is a key to bring the performance analysis to the failure analysis in most tribological components. A macro-micro approach to mixed lubrication has been developed in the present model. The relation between the average contact pressure and the average gap for a typical rough contact patch is first determined numerically in micro scale. Using this relation, the average gap, average oil-film pressure, and average contact pressure in a mixed-lubricated elastohydrodynamic contact can be solved simultaneously in macro scale by treating the contact to be smooth. The total pressure is assumed a superposition of average asperity contact pressure and lubricant pressure. The new approach is simple, efficient and robust, and covers entire range of the load ratio, from unity (dry contact) to zero (full-film EHL). In addition, it can be used for a wide range of operating conditions and on a much larger contact area with a much less computing time than deterministic simulation of mixed lubrication. Implementation of the Fast Fourier Transform (FFT) allows for a rapid calculation of the elastic deformation and asperity con/act pressure. As a demonstration to this new approach, a parametric study of dimensionless speed, load and contact shape on the load ratio and gap ratio was conducted for a gear rough surface of the load ratio, from unity (dry contact) to zero (full-film EHL). In addition, it can be used for a wide range of operating conditions and on a much larger contact area with a much less computing time than deterministic simulation of mixed lubrication. Impletmentation of the Fast Fourier Transform (FFT) allows for a rapid calculation of the elastic deformation and asperity contact pressure. As a demonstration to this new approach, a parametric study of dimensionless speed, load and contact shape on the load ratio and gap ratio was conducted for a gear rough surfaceKeywords
This publication has 26 references indexed in Scilit:
- Numerical Analysis for the Elastic Contact of Real Rough SurfacesTribology Transactions, 1999
- An FFT-Based Method for Rough Surface ContactJournal of Tribology, 1997
- Point Contact EHL Based on Optically Measured Three-Dimensional Rough SurfacesJournal of Tribology, 1997
- Behavior of Elastic-Plastic Rough Surface Contacts as Affected by Surface Topography, Load, and Material HardnessTribology Transactions, 1996
- A Transient EHL Analysis for Line Contacts With Measured Surface Roughness Using Multigrid TechniqueJournal of Tribology, 1994
- A Transient Model for Micro-Elastohydrodynamic Lubrication With Three-Dimensional IrregularitiesJournal of Tribology, 1993
- Surface Roughness Effects in an EHL Line ContactJournal of Tribology, 1992
- Simulation of Elastohydrodynamic Contacts Between Rough SurfacesJournal of Tribology, 1992
- The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular ContactsJournal of Tribology, 1988
- The Effects of Surface Irregularities on the Elastohydrodynamic Lubrication of Sliding Line Contacts. Part I—Single IrregularitiesJournal of Tribology, 1984