Effects of Electrode Microstructures on the Sensitivity and Response Time of Mixed-Potential NO2 Sensor Based on La0.6Sr0.4CoO3 Sensing Electrode
Author:
- 5 January 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (6) , 8621-8626
Abstract
Metal oxide La 0.6 Sr 0.4 CoO 3 was chosen as a sensing electrode for the mixed potentiometric NO 2 sensor based on yttria stabilization zirconia (YSZ). The La 0.6 Sr 0.4 CoO 3 sensing electrodes were sintered at 800°C, 900°C, 1000°C, and 1100°C separately to obtain different microstructures. The relationship between the La 0.6 Sr 0.4 CoO 3 sensing electrode microstructures and the NO 2 sensing performances was described. The La 0.6 Sr 0.4 CoO 3 sensing electrode sintered at 1000°C had the biggest porosity of 29.8%, while the sensor based on it exhibited the maximum response of 141.1 mV at 500 ppm NO 2 and the first-rank sensitivity of 80.3 mV/decade at 400°C. The sensor also showed high stability and selectivity. Different microstructures of the sensing electrode corresponded to different triple-phase boundaries, which was the main place for NO 2 detection, so the performances were affected. Moreover, the result of the electrochemical impedance spectrum also proved the triple-phase boundary played an important role in NO 2 detection.Keywords
Funding Information
- Natural Science Foundation of China (21701041)
- Open Foundation of Hubei Collaborative Innovation Center for High-Efficiency Utilization of Solar Energy (HBSKFQN2017001)
- Talents of High-Level Scientific Research Foundation of Hubei University of Technology (BSQD2017010)
This publication has 39 references indexed in Scilit:
- Zirconia-based electrochemical gas sensors using nano-structured sensing materials aiming at detection of automotive exhaustsElectrochimica Acta, 2009
- Sensing behavior and mechanism of mixed potential NO sensors using NiO, NiO(+YSZ) and CuO oxide electrodesSensors and Actuators B: Chemical, 2009
- Tunable NO[sub 2]-Sensing Characteristics of YSZ-Based Mixed-Potential-Type Sensor Using Ni[sub 1−x]Co[sub x]O-Sensing ElectrodeJournal of the Electrochemical Society, 2009
- Catalytic oxidation of nitrogen monoxide over La1−xCexCoO3 perovskitesCatalysis Today, 2007
- Detection of propene by using new-type impedancemetric zirconia-based sensor attached with oxide sensing-electrodeSensors and Actuators B: Chemical, 2006
- Impedancemetric gas sensor based on zirconia solid electrolyte and oxide sensing electrode for detecting total NO at high temperatureSensors and Actuators B: Chemical, 2003
- The NO2 response of solid electrolyte sensors made using nano-sized LaFeO3 electrodesSensors and Actuators B: Chemical, 2001
- Stabilized Zirconia-Based NO[sub x] Sensor Using ZnFe[sub 2]O[sub 4] Sensing ElectrodeElectrochemical and Solid-State Letters, 2001
- CO/HC sensors based on thin films of LaCoO3 and La0.8Sr0.2CoO3−δ metal oxidesSensors and Actuators B: Chemical, 2000
- Stabilized zirconia-based sensor using oxide electrode for detection of NO in high-temperature combustion-exhaustsSolid State Ionics, 1996