Effect of Annealed and Non‐Annealed Inorganic MnS Hole‐Transport Layer for Efficient Sb2(S,Se)3 Solar Cells: A Theoretical Justification
Open Access
- 23 March 2023
- journal article
- research article
- Published by Wiley in Physica Status Solidi (b)
- Vol. 260 (6)
Abstract
Due to excellent optoelectronic properties, as well as low toxicity, inexpensiveness, and easy availability, the antimony chalcogenides (Sb2(S,Se)3) have emerged as promising and attractive light‐harvesting materials for efficient inorganic solar cells. However, poor stability and the high cost of the conventional organic hole‐transport layer (HTL, Spiro‐OMeTAD) create room to find alternative low‐cost, stable inorganic HTL materials. In that perspective, experimentally thermally evaporated low‐cost inorganic manganese sulfide (MnS) semiconductor is an excellent choice for the HTL with/without post‐annealing treatment. Therefore, herein, initially, an experimental HTL‐free Sb2(S,Se)3 device is simulated, including four other different bandgap‐based devices using SCAPS‐1D software. Later, the effect of annealed and non‐annealed MnS‐HTL for all five Sb2(S,Se)3 solar cells is systematically investigated. It is revealed that all the chosen narrow to wider bandgap‐based Sb2(S,Se)3 devices display enhanced photovoltaic performances after adding the MnS‐HTL, specifically the annealed MnS‐HTL. Due to enhanced energy level alignment and the hole transport between the absorber/HTL interfaces, the narrow‐bandgap device presents higher power conversion efficiency, gets enriched from 8.3% (initial HTL‐free device) to 12.1% (non‐annealed MnS‐HTL device) and 12.7% (annealed MnS‐HTL device), and proves that annealed MnS‐HTL is a feasible substitute for other HTLs.Keywords
This publication has 44 references indexed in Scilit:
- An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cellsChemical Engineering Journal, 2020
- Perovskite Quantum Dots Exhibiting Strong Hole Extraction Capability for Efficient Inorganic Thin Film Solar CellsCell Reports Physical Science, 2020
- Low-temperature processed inorganic hole transport layer for efficient and stable mixed Pb-Sn low-bandgap perovskite solar cellsScience Bulletin, 2019
- Cd-Free Cu(In,Ga)(Se,S)2 Thin-Film Solar Cell With Record Efficiency of 23.35%IEEE Journal of Photovoltaics, 2019
- Effect of deposition pressure on the properties of magnetron sputtering-deposited Sb2Se3 thin-film solar cellsApplied Physics A, 2019
- Sb2(Se1‐xSx)3 Thin‐Film Solar Cells Fabricated by Single‐Source Vapor Transport DepositionSolar RRL, 2019
- Thin-film solar cells exceeding 22% solar cell efficiency: An overview on CdTe-, Cu(In,Ga)Se2-, and perovskite-based materialsApplied Physics Reviews, 2018
- Direct solution deposition of device quality Sb2S3-xSex films for high efficiency solar cellsSolar Energy Materials and Solar Cells, 2018
- High‐performance low bandgap thin film solar cells for tandem applicationsProgress in Photovoltaics: Research and Applications, 2018
- Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysisJournal of Applied Physics, 2000