1.2-kV 4H-SiC Merged PiN Schottky Diode With Improved Surge Current Capability
- 10 June 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 7 (3) , 1496-1504
Abstract
This paper presents the design and experimental analysis of 1200V 4H-SiC Merged PiN Schottky (MPS) diodes. Design considerations and device performances of the MPS diodes are compared with those of the Junction Barrier Schottky (JBS) diodes via numerical simulation and experiments. Due to the limited P+ width/ratio in JBS diodes, PN junction is not turned on until very high current/voltage bias is applied. This increases the device voltage drop and energy dissipation in high current stress conditions. Thanks to the wide P+ region design and the Ohmic contact on the P+ regions, the PN junction turn-on voltage in MPS diodes is substantially decreased, and the surge current capability is improved accordingly. Furthermore, the surge capability of two layouts of the MPS diodes are compared. Layout A with ~60% high P+ ratio can improve the surge current capability by 10% and 20% compared to layout B design (with ~50% P+ ratio) and pure JBS diode (with ~40% P+ ratio), respectively. The reliability of the MPS diodes is studied by repetitive pulse surge current tests. No obvious degradation appears after 5500 test cycles under a surge current stress 20 times the device nominal current rating.Keywords
Funding Information
- National Basic Research Program of China (2018YFB0905704)
- National Natural Science Foundation of China (51577169, 51777187)
This publication has 16 references indexed in Scilit:
- Material science and device physics in SiC technology for high-voltage power devicesJapanese Journal of Applied Physics, 2015
- Design and Experimental Study of 4H-SiC Trenched Junction Barrier Schottky DiodesIEEE Transactions on Electron Devices, 2014
- Switching ruggedness and surge‐current capability of diodes using the self‐adjusting p emitter efficiency diode conceptIET Circuits, Devices & Systems, 2014
- "2nd Generation" SiC Schottky diodes: A new benchmark in SiC device ruggedness2006
- Influence of Layout Geometries on the Behavior of 4H-SiC 600V Merged PiN Schottky (MPS) Rectifiers2006
- Degradation of hexagonal silicon-carbide-based bipolar devicesJournal of Applied Physics, 2006
- SiC MATERIAL PROPERTIESInternational Journal of High Speed Electronics and Systems, 2005
- High-power 4H-SiC JBS rectifiersIEEE Transactions on Electron Devices, 2002
- Physical phenomena in Si power diodes operating at high carrier injection levels and high temperature2002
- Thermal effects on the forward characteristics of silicon p-i-n diodes at high pulse currentsSolid-State Electronics, 1973