Realizing UWB Antenna Array with Dual and Wide Rejection Bands Using Metamaterial and Electromagnetic Bandgaps Techniques
Open Access
- 6 March 2021
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 12 (3) , 269
Abstract
This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25–10.1 GHz. To improve the array’s impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2–12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm × 20 mm × 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15–5.825 GHz) and X-band satellite downlink communication band (7.10–7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals.Keywords
This publication has 24 references indexed in Scilit:
- A Comprehensive Survey of “Metamaterial Transmission-Line Based Antennas: Design, Challenges, and Applications”IEEE Access, 2020
- A Rectangular Notch-Band UWB Antenna with Controllable Notched Bandwidth and Centre FrequencySensors, 2020
- Design and fabrication of triple‐band folded dipole antenna for GPS/DCS/WLAN/WiMAX applicationsMicrowave and Optical Technology Letters, 2019
- A compact size 2.9‐23.5 GHz microstrip patch antenna with WLAN band‐rejectionMicrowave and Optical Technology Letters, 2019
- Design of an UWB antenna with two slits for 5G/WLAN‐notched bandsMicrowave and Optical Technology Letters, 2019
- A Coupled Line Impedance Transformer for High Termination Impedance with a Bandpass Filtering ResponseJournal of Electromagnetic Engineering and Science, 2018
- Design of a Pot-Shaped Monopole Antenna with Dual Band Notched Characteristics for UWB ApplicationJournal of Electromagnetic Engineering and Science, 2017
- Design of a Low Profile and Compact Omnidirectional Filtering Patch AntennaIEEE Access, 2017
- Metamaterial-based antennas for integration in UWB transceivers and portable microwave handsetsInternational Journal of RF and Microwave Computer-Aided Engineering, 2015
- Planar Ultrawideband Antennas With Multiple Notched Bands Based on Etched Slots on the Patch and/or Split Ring Resonators on the Feed LineIEEE Transactions on Antennas and Propagation, 2008