Research on Cutting Tool Edge Geometry Design based on SVR-PSO
Authors:
- Yimin JiangYJYimin Jiang
- Wei HuangWHWei Huang
- Yu TianYTYu Tian
- Mingyang YangMYMingyang Yang
- Wenwu XuWXWenwu Xu
- Yanjie AnYAYanjie An
- Jing LiJLJing Li
- Junqi LiJLJunqi Li
- Ming ZhouMZMing Zhou
Preprint
- 9 August 2023
- preprint
- Published by Springer Nature in Research Square
Abstract
In order to optimize the design of tool edge, an intelligent method was used for modeling and optimization. The tool edge design method based on Support Vector Regression (SVR) and Particle Swarm Optimization (PSO) was proposed. By combining tool edge parameters and processing condition parameters, and learning from empirical data, a functional model was established between tool life, edge parameters, and processing condition parameters. Taking the tool life as the objective function, the optimal edge profile design parameters were solved under different processing condition parameters. The T-shape tool validates was taken as a case for verification. The SVR-PSO function model was established and solved based on the processing condition parameters, and the optimized edge design parameters and predicted tool life were obtained. The results showed that the deviation between the calculated and actual tool life was less than 6.4%. This method was feasible and practical, and has been applied in the design department of tool manufacturing companies.Keywords
All Related Versions
This publication has 14 references indexed in Scilit:
- Application of PSO tuned fuzzy logic controller for LFC of two-area power system with redox flow battery and PV solar parkAin Shams Engineering Journal, 2022
- Brain Age Prediction With Improved Least Squares Twin SVRIEEE Journal of Biomedical and Health Informatics, 2022
- A machine learning approach to the prediction of transport and thermodynamic processes in multiphysics systems - heat transfer in a hybrid nanofluid flow in porous mediaJournal of the Taiwan Institute of Chemical Engineers, 2021
- A Novel Gate Resource Allocation Method Using Improved PSO-Based QEAIEEE Transactions on Intelligent Transportation Systems, 2020
- Optimization of process parameters for the minimization of surface residual stress in turning pure iron material using central composite designMeasurement, 2020
- Tooth surface modification method of face-milling spiral bevel gears with high contact ratio based on cutter blade profile correctionThe International Journal of Advanced Manufacturing Technology, 2020
- Scenarios for a 2 °C world: a trade-linked input–output model with high sector detailClimate Policy, 2015
- Design and Manufacture of a New Micro Ball End Milling with Helical Cylindrical StructureJournal of Mechanical Engineering, 2015
- A genuine face milling cutter geometric model for spiral bevel and hypoid gearsThe International Journal of Advanced Manufacturing Technology, 2013
- Support-vector networksMachine Learning, 1995