Nanoscale silicon substrate patterns from self-assembly of cylinder forming poly(styrene)- block -poly(dimethylsiloxane) block copolymer on silane functionalized surfaces
- 16 December 2016
- journal article
- research article
- Published by IOP Publishing in Nanotechnology
- Vol. 28 (4) , 044001
Abstract
Poly(styrene)- block -poly(dimethylsiloxane) (PS- b -PDMS) is an excellent block copolymer (BCP) system for self-assembly and inorganic template fabrication because of its high Flory–Huggins parameter ( χ ∼ 0.26) at room temperature in comparison to other BCPs, and high selective etch contrast between PS and PDMS block for nanopatterning. In this work, self-assembly in PS- b -PDMS BCP is achieved by combining hydroxyl-terminated poly(dimethylsiloxane) (PDMS-OH) brush surfaces with solvent vapor annealing. As an alternative to standard brush chemistry, we report a simple method based on the use of surfaces functionalized with silane-based self-assembled monolayers (SAMs). A solution-based approach to SAM formation was adopted in this investigation. The influence of the SAM-modified surfaces upon BCP films was compared with polymer brush-based surfaces. The cylinder forming PS- b -PDMS BCP and PDMS-OH polymer brush were synthesized by sequential living anionic polymerization. It was observed that silane SAMs provided the appropriate surface chemistry which, when combined with solvent annealing, led to microphase segregation in the BCP. It was also demonstrated that orientation of the PDMS cylinders may be controlled by judicious choice of the appropriate silane. The PDMS patterns were successfully used as an on-chip etch mask to transfer the BCP pattern to underlying silicon substrate with sub-25 nm silicon nanoscale features. This alternative SAM/BCP approach to nanopattern formation shows promising results, pertinent in the field of nanotechnology, and with much potential for application, such as in the fabrication of nanoimprint lithography stamps, nanofluidic devices or in narrow and multilevel interconnected lines.Keywords
Funding Information
- European Commission (245565)
- Science Foundation Ireland (09/IN.1/602)
This publication has 44 references indexed in Scilit:
- Strategies for Inorganic Incorporation using Neat Block Copolymer Thin Films for Etch Mask Function and Nanotechnological ApplicationAdvanced Materials, 2016
- Directed self-assembly of block copolymers for nanocircuitry fabricationMicroelectronic Engineering, 2015
- Fabrication of well-ordered arrays of silicon nanocrystals using a block copolymer maskPhysica Status Solidi (a), 2013
- Block copolymer lithography: Feature size control and extension by an over-etch techniqueThin Solid Films, 2012
- Advances in top–down and bottom–up surface nanofabrication: Techniques, applications & future prospectsAdvances in Colloid and Interface Science, 2012
- Directed Self-Assembly: Expectations and AchievementsDiscover Nano, 2010
- Solvent‐Vapor‐Induced Tunability of Self‐Assembled Block Copolymer PatternsAdvanced Materials, 2009
- Engineering Silicon Oxide Surfaces Using Self‐Assembled MonolayersAngewandte Chemie International Edition, 2005
- Nanotechnology with Soft MaterialsAngewandte Chemie International Edition, 2003
- Coexistence curves of polystyrene/ poly(dimethylsiloxane) blendsPolymer, 1995