Experimental Investigation on Wellbore Strengthening Based on a Hydraulic Fracturing Apparatus
- 28 November 2017
- journal article
- research article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 140 (5) , 052902
Abstract
Lost circulation is a serious problem which always exists in the petroleum industry. Wellbore strengthening by lost circulation materials (LCMs) is a commonly applied method for mitigating lost circulation. This paper presents a hydraulic fracturing apparatus to investigate the effect of material type, concentration, and particle size distribution (PSD) of LCMs on wellbore strengthening behavior. In addition, the characteristics of pressure curves in the fracturing process are analyzed in detail. The results showed that the fracture pressure of the artificial core can be increased by LCMs, and there exists an optimum concentration of LCMs for the maximum wellbore strengthening effect. The LCMs with wide PSD can significantly increase the fracture pressure. However, some LCMs cannot increase or even decrease the fracture pressure; this is resulting from the LCMs with relatively single PSD that makes the quality of mud cake worse. The representative pressure curve in the fracturing process by drilling fluids with LCMs was divided into five parts: the initial cake formation stage, elastic plastic deformation stage, crack stability development stage, crack instability development stage, and unstable plugging stage. The actual fracturing curves were divided into four typical types due to missing of some stages compared with the representative pressure curve. In order to strengthen the wellbore in effective, good LCMs should be chosen to improve the maximum pressure in the elastic plastic deformation stage, extend the stable time of pressure bearing in the crack stability development stage, and control the crack instability development stage.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (2013CB228003)
- Southwest Petroleum University (PLN1310)
This publication has 36 references indexed in Scilit:
- Thermoporoelastic Modeling of Time-Dependent Wellbore Strengthening and Casing SmearJournal of Energy Resources Technology, 2016
- A parametric study for wellbore strengtheningJournal of Natural Gas Science and Engineering, 2016
- Effect on Fracture Pressure by Adding Iron-Based and Calcium-Based Nanoparticles to a Nonaqueous Drilling Fluid for Permeable FormationsJournal of Energy Resources Technology, 2016
- A fracture-mechanics-based model for wellbore strengthening applicationsJournal of Natural Gas Science and Engineering, 2016
- Integrated Experimental and Analytical Wellbore Strengthening Solutions by Mud Plastering EffectsJournal of Energy Resources Technology, 2016
- Geomechanics of Lost-Circulation Events and Wellbore-Strengthening OperationsSPE Journal, 2015
- Finite-Element Studies of Hoop-Stress Enhancement for Wellbore StrengtheningSPE Drilling & Completion, 2015
- Full Fluid–Solid Cohesive Finite-Element Model to Simulate Near Wellbore FracturesJournal of Energy Resources Technology, 2014
- Elasto-plastic fracturing model for wellbore stability using non-penetrating fluidsJournal of Petroleum Science and Engineering, 2004
- Utilization of Mud Weights in Excess of the Least Principal Stress to Stabilize Wellbores: Theory and Practical ExamplesSPE Drilling & Completion, 2001