Thermal and Electrical Properties of New Cathode Material Ba[sub 0.5]Sr[sub 0.5]Co[sub 0.8]Fe[sub 0.2]O[sub 3−δ] for Solid Oxide Fuel Cells
Authors:
- 1 January 2005
- journal article
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 8 (8) , A428-A431
Abstract
A newly developed cathode material, , was synthesized and characterized. X-ray diffraction results identified it as a cubic perovskite structure. Thermogravimetric results showed that lattice oxygen loss was about 2% in weight between 50 and 1000°C. Thermal expansion coefficient results in air and argon were extraordinarily high, with slope changes occurring at about 382 and 360°C, respectively. Electrical conductivity values were sufficient for cathode application with the maximum of about at 500°C in air and at 900°C in , correspondingly. Both thermal and electrical properties were closely associated with lattice oxygen behaviors and oxygen partial pressure.Keywords
This publication has 19 references indexed in Scilit:
- A high-performance cathode for the next generation of solid-oxide fuel cellsNature, 2004
- Bi-Based Oxide Anodes for Direct Hydrocarbon SOFCs at Intermediate TemperaturesElectrochemical and Solid-State Letters, 2004
- Cathode Materials for Reduced-Temperature SOFCsJournal of the Electrochemical Society, 2003
- Sm0.5Sr0.5CoO3 cathodes for low-temperature SOFCsSolid State Ionics, 2002
- A Fuel-Flexible Ceramic-Based Anode for Solid Oxide Fuel CellsElectrochemical and Solid-State Letters, 2002
- Recent advances in Perovskite-type materials for solid oxide fuel cell cathodesInternational Journal of Inorganic Materials, 2001
- Advances in solid oxide fuel cell technologySolid State Ionics, 2000
- Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°CSolid State Ionics, 2000
- Electrode Performance Test on Single Ceramic Fuel Cells Using as Electrolyte Sr‐ and Mg‐Doped LaGaO3Journal of the Electrochemical Society, 1997
- Ceramic Fuel CellsJournal of the American Ceramic Society, 1993