BioShield-12: A 3D-Printed Conformal Chest Shield for Wireless 12-Lead ECG Acquisition
Open Access
Abstract
Reproducible electrode placement remains a critical, unresolved challenge in wearable ECG systems, where manual electrode attachment introduces inter-session positional error that degrades signal morphology and compromises multi-lead representation. Although the 12-lead clinical ECG system is the gold standard, conventional setups are often bulky, wired, and dependent on operator expertise, limiting their use in prehospital or remote care. Recent advancements in wearable and wireless ECG systems have improved mobility and real-time monitoring, but they typically suffer from limited lead coverage, discomfort, and unstable connectivity. This paper introduces BioShield-12, an anatomically adaptive thermoplastic polyurethane (TPU) shield fabricated using fused deposition modeling (FDM) to improve multi-site electrode placement and 12-lead electrocardiogram (ECG) reconstruction from a single-shield design based on anthropometric data from ten healthy adults (five male, five female; sizing cohort). Mechanical characterization confirmed TPU’s suitability as a compliant wearable substrate, with toughness of 34.4 MJ/m3 and elastic modulus of 79.1 MPa. Feasibility validation against a research-grade reference (BIOPAC MP36) in twenty healthy subjects (n = 20; 10 male, 10 female; mean age 21 ± 4 years) demonstrated consistent signal fidelity (SNR: 17.5–22.5 dB; Pearson r: 0.93–0.98; power-line interference ratio (PLIR): 1.0–3.2 × 10−5) and confirmed feasibility of 12-lead reconstruction. This work provides proof-of-concept for an additive manufacturing-based conformal electrode interface that eliminates variability in placement without needing individual attachment.Keywords
Funding Information
- Qassim University (QU-APC-2024-9/1)
This publication has 30 references indexed in Scilit:
- Micropatterned Biphasic Printed Electrodes for High‐Fidelity on‐Skin BioelectronicsAdvanced Functional Materials, 2025
- 3D‐Printed Mixed Ionic‐Electronic Conductive Polymer Composites for Long‐Term Bioelectronic SensingAdvanced Materials Technologies, 2025
- Efficacy of Various Dry Electrode‐Based ECG Sensors: A ReviewJournal of Biomedical Materials Research Part A, 2024
- Additive Manufacturing of Thermoplastic Polyurethane Elastomers: A Review2024
- Additive manufacturing of flexible thermoplastic polyurethane (TPU): enhancing the material elongation through process optimisationProgress in Additive Manufacturing, 2024
- A wavelet subband based LSTM model for 12-lead ECG synthesis from reduced lead setBiomedical Engineering Letters, 2024
- Practical intelligent diagnostic algorithm for wearable 12-lead ECG via self-supervised learning on large-scale datasetNature Communications, 2023
- Lessons From the COVID-19 PandemicJACC, 2022
- Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface LatticesAdvanced Engineering Materials, 2019
- The effect of precordial lead displacement on ECG morphologyMedical & Biological Engineering & Computing, 2013