Effect of Pre-Heat Treatment on Microstructure and Properties of As-Extruded AZ91-CaO Alloy
Open Access
Abstract
The effects of different pre-heat treatments on the microstructure, mechanical properties and corrosion resistance of extruded AZ91 and AZ91-CaO alloys were investigated. The results showed that the microstructure of AZ91 is clearly refined after adding CaO modifier. After solution heat treatment (T4), most of the second phase was dissolved into the matrix, while after aging heat treatment (T6), new fine and discontinuous Mg17Al12 were precipitated in both AZ91 and AZ91-CaO alloys. The average grain size of the extruded AZ91-CaO-T6 alloy was 0.9 μm, and the second phase has the smallest size and more uniform dispersion. Therefore, the mechanical properties of AZ91-CaO-T6-EX are optimal, and its ultimate tensile strength, tensile yield strength and elongation reach 367.6 MPa, 320.2 MPa, and 9.5%, respectively. Meanwhile, the electrochemical and salt spray corrosion experiments also showed that the AZ91-CaO-T6-EX alloy had the best corrosion resistance; the self-corrosion potential was −1.08 mV, the corrosion current density was 5.65 μA/cm2, and the annual corrosion rate was 0.36 mm/y after 72 h salt spray treatment. This high corrosion performance was mainly attributed to the dispersed second phase with small size and fine grain size.Keywords
Funding Information
- National Natural Science Foundation of China (51871166, 52171241, 52201301, U1764254)
- Joint Foundation of the National Natural Science Foundation of China (51871166, 52171241, 52201301, U1764254)
This publication has 37 references indexed in Scilit:
- Effects of processing parameters and Ca content on microstructure and mechanical properties of squeeze casting AZ91–Ca alloysMaterials Science and Engineering: A, 2014
- Effects of the addition of Ca and Sb on the microstructure and mechanical properties of AZ91 magnesiumMaterials Science and Engineering: A, 2013
- High temperature oxidation of AZ31+0.3wt.%Ca and AZ31+0.3wt.%CaO magnesium alloysCorrosion Science, 2013
- Role of particle stimulated nucleation in recrystallization of hot extruded Al 6061/SiCp compositesTransactions of Nonferrous Metals Society of China, 2013
- Effect of particle size on microstructure and mechanical properties of SiCp/AZ91 magnesium matrix compositeMaterials Science and Engineering: A, 2012
- Grain refinement of Ca addition in a twin-roll-cast Mg–3Al–1Zn alloyMaterials Chemistry and Physics, 2012
- Microstructure and mechanical properties of SiC nanoparticles reinforced magnesium matrix composites fabricated by ultrasonic vibrationMaterials Science and Engineering: A, 2011
- Effect of heat treatment on corrosion behaviour of magnesium alloy AZ91D in simulated body fluidCorrosion Science, 2010
- Effect of Ca and Y additions on oxidation behavior of AZ91 alloy at elevated temperaturesTransactions of Nonferrous Metals Society of China, 2009
- Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloyCorrosion Science, 2000