Design and flow simulation of a micro steam jet pump
Authors:
- 30 March 2022
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in Modern Physics Letters B
- Vol. 36 (09)
Abstract
The development of micropump is directly related to the popularization and application of microfluidic systems. Recently, microfluidic systems have more urgent requirements for stable operation and simple structure of micropumps. For these purposes, a novel micro steam jet pump which uses planar induction heating to evaporate the initial fluid is presented. This new micropump could generate continuous flow with merits of no moving parts, stable operation and easy integration. A negative pressure is formed flowed with high-speed flow of vapor in the chamber to pump and eject liquid, and then realize continuous pumping. The working chamber of the micropump is calculated with aerodynamic function, and the simulation analysis is carried on with COMSOL Multiphysics 5.5. By changing key working parameters, appropriate working conditions are adopted with simulation analysis. When the primary vapor temperature is 403.15 K, the inlet width of the tapered section of the mixing chamber is 0.4 mm and the outlet width of the diffuser is 0.5 mm, the mingling and enhancing pressure performance of the micro steam jet pump is better. The optimization of design and simulation involved in this paper provided a good guidance for the design and experimental study of the micro steam jet pump.Keywords
Funding Information
- Natural Science Foundation of Beijing (3192010)
This publication has 26 references indexed in Scilit:
- Numerical study for the influences of primary nozzle on steam ejector performanceApplied Thermal Engineering, 2016
- A thermal bubble micro-actuator with induction heatingSensors and Actuators A: Physical, 2015
- Numerical investigation of the influences of mixing chamber geometries on steam ejector performanceDesalination, 2014
- Configuration dependence and optimization of the entrainment performance for gas–gas and gas–liquid ejectorsApplied Thermal Engineering, 2012
- Laser-induced thermal bubbles for microfluidic applicationsLab on a Chip, 2011
- Micropumps, microvalves, and micromixers within PCR microfluidic chips: Advances and trendsBiotechnology Advances, 2007
- Experimental and numerical study on a micro jet cooling solution for high power LEDsScience China Technological Sciences, 2007
- A collapsing bubble-induced micropump: An experimental studySensors and Actuators A: Physical, 2007
- Numerical and experimental investigations on supersonic ejectorsInternational Journal of Heat and Fluid Flow, 2005
- Thermal micro pumps for a loop-type micro channelSensors and Actuators A: Physical, 2004