Fabrication Cost Analysis for Contactless 3-D ICs
- 9 April 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (5) , 758-762
Abstract
The manufacturing cost of contactless 3-D circuits with inductive links is explored for the first time. The high-volume manufacturing (HVM) cost of contactless 3-D ICs is modeled by considering the on-chip inductor area and other important parameters, such as the coupling efficiency, which depend upon specific steps of the fabrication process. Inductive links based on current mode logic (CML) transceivers are simulated across a number of integration scenarios in a commercial 65-nm CMOS technology process, thereby evaluating the cost of these manufacturing options for performance and power objectives. Assuming a 10 Gb/s data rate, the power and area of the inductive link are determined for wafer-to-wafer and die-to-wafer integration and communication distances in the range of 5 $\mu \text{m}$ (face-to-face) to 120 $\mu \text{m}$ (face-to-back). An HVM cost estimation for each investigated inductive link scheme is provided for these integration approaches. Additional processing steps attributed to 3-D integration increase the aggregate cost by 2.5%–4.5% for a case study of a three-tier stack, compared to a conventional 2-D process. Moreover, the yield is explored for each integration approach considering the inductor area for contactless 3-D ICs.Keywords
Funding Information
- Engineering and Physical Sciences Research Council
- University of Manchester
This publication has 17 references indexed in Scilit:
- Contactless inter-tier communication for heterogeneous 3-D ICs2017
- Development of multi-stack dielectric wafer bonding2016
- 2.31-Gb/s/ch Area-Efficient Crosstalk Canceled Hybrid Capacitive Coupling Interconnect for 3-D IntegrationIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2016
- Reliability Challenges Related to TSV Integration and 3-D StackingIEEE Design & Test, 2015
- Bandwidth-to-area comparison of through silicon vias and inductive links for 3-D ICs2015
- Cost components for 3D system integration2014
- A 1 TB/s 1 pJ/b 6.4 ${\rm mm}^{2}/{\rm TB/s}$ QDR Inductive-Coupling Interface Between 65-nm CMOS Logic and Emulated 100-nm DRAMIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2012
- Device Requirements for Optical Interconnects to Silicon ChipsProceedings of the IEEE, 2009
- Investigation of Gross Die Per Wafer FormulasIEEE Transactions on Semiconductor Manufacturing, 2005
- A cluster-modified Poisson model for estimating defect density and yieldIEEE Transactions on Semiconductor Manufacturing, 1990