Vinyl-terminated butadiene acrylonitrile improves the toughness, processing window, and thermal stability of bismaleimide resin
Authors:
- 20 October 2016
- journal article
- research article
- Published by SAGE Publications in High Performance Polymers
- Vol. 29 (10) , 1199-1208
Abstract
Structural materials with excellent toughness, a wide processing window, outstanding mechanical performance, and high thermal stability are highly desired in engineering. This work reports a novel bismaleimide (BMI) resin system fabricated using bis[4-(4-maleimidephen-oxy)phenyl)]propane (BMPP), 1-(2-methyl-5-(2,5-dioxo-2H-pyrrol-1(5 H)-yl) phenyl)-1H-pyrrole-2,5-dione (BTM), and diallyl bisphenol A (DABPA) by a melt method. The behaviors of the BTM/BMPP/DABPA resin were modified by adding vinyl-terminated butadiene acrylonitrile (VTBN) in various amounts. The cured BTM/BMPP/DABPA/VTBN resin system exhibited all of the abovementioned desirable properties. Excellent performance was achieved by the post-cured BMI resin containing 6 phr of VTBN (VTBN-6). The glass transition temperature ( Tg) and the 5% weight loss temperature of VTBN-6 were 278°C and 408°C, respectively. Relative to VTBN-0 (BMI resin without VTBN), the impact strength of cured VTBN-6 (12.32 KJ/m2) improved by 45.6%, and the fracture toughness values, KIC and GIC, increased by 48.7% and 26%, respectively. Moreover, the prepolymer of VTBN-6 exhibited low viscosity over a wide temperature range (70–200°C) under dynamic conditions and for an extended time (70 min; 75% improvement over VTBN-0) in an isothermal test. These results confirm the wide processing window of VTBN-6. The high toughness of the VTBN-containing BMI resin was compatible with other excellent performances of the modified resin.Keywords
This publication has 25 references indexed in Scilit:
- High-performance bismaleimide resins with low cure temperature for resin transfer molding processHigh Performance Polymers, 2016
- Thermosetting bismaleimide resins generating covalent and multiple hydrogen bondsJournal of Applied Polymer Science, 2015
- Recent advances in fiber/matrix interphase engineering for polymer compositesProgress in Materials Science, 2015
- Thermally Stable Autonomic Healing in Epoxy using a Dual‐Microcapsule SystemAdvanced Materials, 2013
- The tribological properties of benzoxazine-bismaleimides composites with functionalized nano-SiO2Journal of Applied Polymer Science, 2013
- Synthesis and Characterization of 3,3′-bis (3-maleimidophenyl) Phenyl Phosphine Oxide (BMI)/1, 3-Cyanatobenzene Epoxy Inter-crosslinked Matrices for Engineering ApplicationsHigh Performance Polymers, 2010
- Novel thermosetting resins based on 4-(N-maleimidophenyl)glycidylether: II. Bismaleimides and polybismaleimidesPolymer, 2004
- Synthesis and characterization of functionalized thermoplastics as reactive modifiers for bismaleimide resinsPolymer International, 2001
- Investigation of readily processable thermoplastic-toughened thermosets: IV. BMIs toughened with hyperbranched polyesterJournal of Applied Polymer Science, 1999
- High temperature resins based on allylamine/bismaleimidesPolymer, 1996