Dynamic Simulation of Full Startup Procedure of Heavy-Duty Gas Turbines
Authors:
- 19 June 2002
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 124 (3) , 510-516
Abstract
A simulation program for transient analysis of the startup procedure of heavy duty gas turbines for power generation has been constructed. Unsteady one-dimensional conservation equations are employed and equation sets are solved numerically using a fully implicit method. A modified stage-stacking method has been adopted to estimate the operation of the compressor. Compressor stages are grouped into three categories (front, middle, rear), to which three different stage characteristic curves are applied in order to consider the different low-speed operating characteristics. Representative startup sequences were adopted. The dynamic behavior of a representative heavy duty gas turbine was simulated for a full startup procedure from zero to full speed. Simulated results matched the field data and confirmed unique characteristics such as the self-sustaining and the possibility of rear-stage choking at low speeds. Effects of the estimated schedules on the startup characteristics were also investigated. Special attention was paid to the effects of modulating the variable inlet guide vane on startup characteristics, which play a key role in the stable operation of gas turbines.Keywords
This publication has 11 references indexed in Scilit:
- Performance prediction of axial flow compressors using stage characteristics and simultaneous calculation of interstage parametersProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2001
- Model Development and Simulation of Transient Behavior of Heavy Duty Gas TurbinesJournal of Engineering for Gas Turbines and Power, 2000
- Comparative Analysis of Gas Turbine Engine Starting1998
- The effect of gas turbine coolant modulation on the part load performance of combined cycle plants. Part 1: Gas turbinesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 1997
- Performance Analysis of a Turbine Stage Having Cooled Nozzle Blades With Trailing Edge Ejection1996
- Rotating stall performance and recoverability of a high-speed 10-stage axial flow compressorJournal of Propulsion and Power, 1993
- Health Monitoring of Variable Geometry Gas Turbines for the Canadian NavyJournal of Engineering for Gas Turbines and Power, 1989
- Simulation of Centrifugal Compressor Transient Performance for Process Plant ApplicationsJournal of Engineering for Power, 1983
- A Generalized Mathematical Model to Estimate Gas Turbine Starting CharacteristicsJournal of Engineering for Power, 1982
- The Use of a Hybrid Computer in the Optimization of Gas Turbine Control ParametersJournal of Engineering for Power, 1973