Influence of high altitude on the strength of aerated concrete
Open Access
- 11 April 2023
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (17) , 11762-11770
Abstract
The specimens prepared with different temperature have different content and crystallinity of tobermorite, resulting in different strength.Keywords
Funding Information
- National Key Research and Development Program of China (2019YFC1904103)
This publication has 27 references indexed in Scilit:
- Effect of C/S ratio on morphology and structure of hydrothermally synthesized calcium silicate hydrateJournal of Wuhan University of Technology-Mater. Sci. Ed., 2011
- In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al additionCement and Concrete Research, 2011
- Use of clinoptilolite for the immobilization of heavy metal ions and preparation of autoclaved building compositesJournal of Hazardous Materials, 2009
- FTIR study and cation exchange capacity of Fe3+- and Mg2+-substituted calcium silicate hydratesJournal of Alloys and Compounds, 2009
- Hydrothermal synthesis of hydrogarnet and tobermorite at 175 °C from kaolinite and metakaolinite in the CaO–Al2O3–SiO2–H2O system: A comparative studyApplied Clay Science, 2009
- Hydrothermal solidification of blast furnace slag by formation of tobermoriteJournal of Materials Science, 2007
- Microstructure and properties of silty siliceous crushed stone-lime aerated concreteJournal of Wuhan University of Technology-Mater. Sci. Ed., 2006
- Hydration behaviour of lime–co-calcined kaolin–petroleum effluent treatment plant sludgeCement and Concrete Research, 2002
- Phase Evolution during Autoclaving Process of Aerated ConcreteJournal of the American Ceramic Society, 1992
- The determination of crystallinity of tobermorite in autoclaved productsCement and Concrete Research, 1980