Mechanism of electromigration-induced failure in the 97Pb–3Sn and 37Pb–63Sn composite solder joints
Authors:
- 15 December 2003
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 94 (12) , 7560-7566
Abstract
The electromigration-induced failure in the composite solder joints consisting of 97Pb–3Sn on the chip side and 37Pb–63Sn on the substrate side was studied. The under-bump metallization (UBM) on the chip side was 5 μm thick electroplated Cu coated on sputtered TiW/Cu and on the substrate side was electroless Ni/Au. It was observed that failure occurred in joints in a downward electron flow (from chip to substrate), while those joints having the opposite current polarity showed only minor changes. During electromigration, in addition to the compositional change by the moving of Pb atoms in the same direction as the electrons, current crowding was observed inside the UBM and it enhanced the phase transformation of Cu to and to at the UBM/solder interface. Due to the growth of the Cu UBM was consumed rapidly, resulting in void formation-induced failure at the cathode side. The intermetallic compound and void were first initiated from the upper left-hand side corner of the contact window which matches the current crowding region. The sequence of Cu UBM consumption and void formation is presented. The current crowding has been confirmed by simulation. The mechanism of electromigration-induced failure in the composite solder joint structure is discussed.
Keywords
This publication has 10 references indexed in Scilit:
- Thermomigration in Pb–Sn solder joints under joule heating during electric current stressingApplied Physics Letters, 2003
- Current-crowding-induced electromigration failure in flip chip solder jointsApplied Physics Letters, 2002
- Electromigration of eutectic SnPb and SnAg3.8Cu0.7 flip chip solder bumps and under-bump metallizationJournal of Applied Physics, 2001
- Tin–lead (SnPb) solder reaction in flip chip technologyMaterials Science and Engineering: R: Reports, 2001
- Electromigration of eutectic SnPb solder interconnects for flip chip technologyJournal of Applied Physics, 2001
- Interdiffusion of high-Sn/high-Pb (SnPb) solders in low-temperature flip chip joints during reflowApplied Physics Letters, 1999
- Electric current effects upon the Sn/Cu and Sn/Ni interfacial reactionsJournal of Electronic Materials, 1998
- The formation of Cu3Sn intermetallic on the reaction of cu with 95Pb-5Sn solderJournal of Electronic Materials, 1986
- Kinetics of interfacial reaction in bimetallic CuSn thin filmsActa Metallurgica, 1982
- Interdiffusion and reaction in bimetallic Cu-Sn thin filmsActa Metallurgica, 1973