g6TiSCH: Generalized 6TiSCH for Agile Multi-PHY Wireless Networking
Open Access
- 3 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 84465-84479
Abstract
Wireless networks traditionally use a single physical layer for communication: some use high bit-rate short-range radios, others low bit-rate long-range radios. This article introduces g6TiSCH, a generalization of the standards-based IETF 6TiSCH protocol stack. g6TiSCH allows nodes equipped with multiple radios to dynamically switch between them on a link-by-link basis, as a function of link-quality. This approach results in a dynamic trade-off between latency and power consumption. We evaluate the performance of the approach experimentally on an indoor office testbed of 36 OpenMote B boards. Each OpenMote B can communicate using FSK 868 MHz, O-QPSK 2.4 GHz or OFDM 868 MHz, a combination of long-range and short-range physical layers. We measure network formation time, end-to-end reliability, end-to-end latency, and battery lifetime. We compare the performance of g6TiSCH against that of a traditional 6TiSCH stack running on each of the three physical layers. Results show that g6TiSCH yields lower latency and network formation time than any of the individual PHYs, while maintaining a similar battery lifetime.Keywords
Funding Information
- French Agence Nationale de la Recherche (CIFRE 2019/0605)
This publication has 24 references indexed in Scilit:
- Industrial Internet of Things monitoring solution for advanced predictive maintenance applicationsJournal of Industrial Information Integration, 2017
- Support for hybrid network in RPL2016
- PEACH: Predicting Frost Events in Peach Orchards Using IoT TechnologyEAI Endorsed Transactions on Internet of Things, 2016
- Routing Protocol for Heterogeneous Wireless Mesh NetworksIEEE Transactions on Vehicular Technology, 2016
- A survey on wireless sensor networks for smart gridComputer Communications, 2015
- System evaluation of a practical IEEE 802.15.4/4e/4g multi‐physical and multi‐hop smart utility networkIET Communications, 2015
- Hybrid wireless sensor network for building energy management systems based on the 2.4GHz and 400MHz bandsInformation Systems, 2015
- 6TiSCH: deterministic IP-enabled industrial internet (of things)IEEE Communications Magazine, 2014
- A Review of Wireless-Sensor-Network-Enabled Building Energy Management SystemsACM Transactions on Sensor Networks, 2014
- OpenWSN: a standards‐based low‐power wireless development environmentTransactions on Emerging Telecommunications Technologies, 2012