Heat Transfer Augmentation in a Rectangular Channel With Slit Rib-Turbulators on Two Opposite Walls
Authors:
- 1 July 1997
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 119 (3) , 617-623
Abstract
The effect of slit ribs on heat transfer and friction in a rectangular channel is investigated experimentally. The slit ribs are arranged in-line on two opposite walls of the channel. Three rib open-area ratios (β = 24, 37, and 46 percent), three rib pitch-to-height ratios (Pi/H = 10, 20, and 30), and two rib height-to-channel hydraulic diameter ratios (H/De = 0.081, and 0.162) are examined. The Reynolds number ranges from 10,000 to 50,000. Laser holographic interferometry is employed to measure the local heat transfer coefficients of the ribbed wall quantitatively, and observe the flow over the ribbed wall qualitatively. The results show that the slit rib has an advantage of avoiding “hot spots.” In addition, the heat transfer performance of the slit-ribbed channel is much better than that of the solid-ribbed channel. Semi-empirical correlations for friction and heat transfer are developed to account for rib spacings and open-area ratios. These correlations may be used in the design of turbine blade cooling passages.Keywords
This publication has 10 references indexed in Scilit:
- Effect of ridge shapes on turbulent heat transfer and friction in a rectangular channelInternational Journal of Heat and Mass Transfer, 1993
- Developing Heat Transfer and Friction in a Ribbed Rectangular Duct With Flow Separation at InletJournal of Heat Transfer, 1992
- Turbulent Heat Transfer Augmentation and Friction in Periodic Fully Developed Channel FlowsJournal of Heat Transfer, 1992
- Turbulent Heat Transfer and Friction in a Square Channel With Discrete Rib TurbulatorsJournal of Turbomachinery, 1991
- COMBINED EFFECTS OF RIB ANGLE-OF-ATTACK AND PITCH-TO-HEIGHT RATIO ON MASS TRANSFER FROM A SURFACE WITH TRANSVERSE RIBSExperimental Heat Transfer, 1989
- Heat Transfer and Friction Characteristics in Rectangular Channels With Rib TurbulatorsJournal of Heat Transfer, 1988
- Heat Transfer and Friction in Channels With Two Opposite Rib-Roughened WallsJournal of Heat Transfer, 1984
- An investigation of heat transfer and friction for rib-roughened surfacesInternational Journal of Heat and Mass Transfer, 1978
- Heat transfer and friction in tubes with repeated-rib roughnessInternational Journal of Heat and Mass Transfer, 1971
- Heat and momentum transfer in smooth and rough tubes at various prandtl numbersInternational Journal of Heat and Mass Transfer, 1963