Manufacturing and physico-mechanical characterization of carbon nanohorns/polyacrylonitrile nanocomposites
Open Access
- 1 September 2011
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 46 (17) , 5680-5689
Abstract
The use of carbon nanohorns (SWCNHs) as a modifying filler in a polyacrylonitrile (PAN) matrix is studied with the goal of elaborating nanocomposites. The study deals with assessment of the dispersity of SWCNHs in a PAN polymer suspension. The SWCNHs were introduced into the PAN-based suspension using different methods, including mechanical stirring, ultrasonification and the combination of ultrasonification with addition of a surfactant. Agglomeration and dispersion processes of SWCNH in the polymer suspensions were studied using DLS technique and turbidimetry. The resulting properties of nanocomposite foils after solidification in water ambient were verified in various tests. The mechanical tensile properties (tensile strength, modulus and strain to fracture) of the nanocomposites before and after the dispersion process were compared. The nanocomposites obtained under optimally prepared suspension perform the highest strain to fracture in tensile test. Electrical resistivity and thermal conductivity of nanocomposites samples after appropriate dispersion of SWCNHs in the PAN suspension were also determined. The presence of SWCNH in the PAN suspension affects the structure of nanocomposites after solidification through changing structural ordering of the polymer. The study revealed that the polymeric suspensions prepared in optimum processing conditions contain the carbon aggregates the size of which correspond almost to the mean size of a dahlia flower-like structured particle, i.e., 50–250 nm and it was not possible to separate such particles into a single form of carbon nanohorn by the techniques used.Keywords
This publication has 54 references indexed in Scilit:
- Effect of spinning conditions on the mechanical properties of polyacrylonitrile fibers modified with carbon nanotubesJournal of Applied Polymer Science, 2009
- Single wall carbon nanohorns coated with anatase titanium oxideCarbon, 2009
- Effect of dispersion of carbon nanotubes in polyacrylonitrile matrix on mechanical and thermal behavior of nanocompositesJournal of Physics: Conference Series, 2009
- Properties of composites of fluorinated single walled carbon nanotubes and polyacrylonitrileMaterials Letters, 2005
- Structure and properties of polyacrylonitrile/single wall carbon nanotube composite filmsPolymer, 2005
- Water‐Based Single‐Walled‐Nanotube‐Filled Polymer Composite with an Exceptionally Low Percolation ThresholdAdvanced Materials, 2004
- Ultra-low electrical percolation threshold in carbon-nanotube-epoxy compositesPolymer, 2003
- Preparation and characterization of porous polyacrylonitrile membranes for lithium-ion polymer batteriesJournal of Power Sources, 2003
- Evolution of structure and properties of PAN precursors during their conversion to carbon fibersCarbon, 2003
- Carbon nanotubes, buckyballs, ropes, and a universal graphitic potentialPhysical Review B, 2000