Development and Testing of a Roots Pump for Hydrogen Recirculation in Fuel Cell System
Open Access
- 15 November 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (22) , 8091
Abstract
In this paper, the development and testing of a Roots pump with a new rotor profile for hydrogen recirculation in the fuel cell system are presented. The design method of the rotor profile, port position, and structure of the pump is presented. A prototype of a three-lobe Roots pump with helical rotors was fabricated, and its performance was experimentally tested. The measured data show that the effect of the pressure difference on the flow rate and volumetric efficiency of the Roots pump is the most significant, while the effect of suction pressure is limited. It is concluded that the leakage rather than flow resistance is the key factor, which has a major influence on volumetric and isentropic efficiency. The comparison of the performance is also given by the measured results of the same Roots pump working with air, helium, and hydrogen. Finally, the successful integration of the Roots pumps into three PEM fuel cell systems is reported and the optimal operating parameters of the Roots pump in the systems under various loads are also presented. It is found that the performance of the Roots pump integrated into the fuel cell system is better than that measured with pure hydrogen on the test rig. The performance maps composed of all the measured data of the Roots pump are very helpful for the optimal design and operation of the fuel cell system.Keywords
Funding Information
- National Key Research and Development Program of China (2018YFB0105303)
- National Natural Science Foundation of China (51976154)
This publication has 27 references indexed in Scilit:
- Hydrogen circulation system model predictive control for polymer electrolyte membrane fuel cell-based electric vehicle applicationInternational Journal of Hydrogen Energy, 2020
- Hydrogen utilization enhancement of proton exchange membrane fuel cell with anode recirculation system through a purge strategyInternational Journal of Hydrogen Energy, 2020
- Parametric study on dynamic heat and mass transfer response in polymer electrolyte membrane fuel cell for automotive applicationsApplied Thermal Engineering, 2020
- Comparison of self-humidification effect on polymer electrolyte membrane fuel cell with anodic and cathodic exhaust gas recirculationInternational Journal of Hydrogen Energy, 2020
- Materials, technological status, and fundamentals of PEM fuel cells – A reviewMaterials Today, 2020
- A parametric comparison of three fuel recirculation system in the closed loop fuel supply system of PEM fuel cellInternational Journal of Hydrogen Energy, 2019
- Advances in stationary and portable fuel cell applicationsInternational Journal of Hydrogen Energy, 2016
- Performance and degradation of Proton Exchange Membrane Fuel Cells: State of the art in modeling from atomistic to system scaleJournal of Power Sources, 2016
- A review of PEM fuel cell durability: materials degradation, local heterogeneities of aging and possible mitigation strategiesWires Energy and Environment, 2014
- Analysis and control of a hybrid fuel delivery system for a polymer electrolyte membrane fuel cellJournal of Power Sources, 2008