Smart Wireless Climate Sensor Node for Indoor Comfort Quality Monitoring Application
Open Access
Abstract
The indoor environment climate should be controlled by continuously maintaining the temperature and relative humidity to achieve thermal comfort. A monitoring system of both parameters is the first step to improving indoor comfort quality. This paper presents a smart wireless climate sensor node for indoor temperature and humidity monitoring with a powering strategy and design approach for autonomous operation. The data logging results are sent to the cloud using Internet of Things protocol for thermal comfort monitoring and analysis. The monitoring and analysis results are useful to monitor and control the indoor thermal comfort condition for room occupants. A sensor node was designed that includes a low-power mode and compact size features. It consists of a built-in AVR-based microcontroller, a temperature and humidity sensor, and a wireless module with a supercapacitor as the power storage. A low-power algorithm and Internet of Things system were implemented to reduce the total energy consumption as low as possible during operation while improving the thermal comfort quality. This developed sensor node has a small error for temperature, and relative humidity sensed values resulting from calibration. At the same time, it also consumes low power for one cycle of data acquisition. The device was integrated with an Internet of Things monitoring system to monitor indoor thermal comfort in the field experiment. The experiment results showed that the indoor temperature and relative humidity were measured and recorded in the range of 25–30 °C and 30–40%, respectively. This prototype is a preliminary design to achieve an autonomous sensor node with a low-power energy consumption goal. Thus, with this feature, the developed sensor node has potential to couple with a micro energy harvester module toward a fully autonomous active node in further development.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST: 110-2222-E-167-003-MY3)
This publication has 19 references indexed in Scilit:
- Effect of Supply Air Temperature on Indoor Thermal Comfort in a Room with Radiant Heating and Mechanical VentilationEnergy Procedia, 2017
- The Energy Saving and Indoor Comfort Improvements with Latent Thermal Energy Storage in Building Retrofits in CanadaEnergy Procedia, 2017
- Impact of indoor environmental quality on occupant well-being and comfort: A review of the literatureInternational Journal of Sustainable Built Environment, 2016
- Temperature Monitoring Through Wireless Sensor Network Using an 802.15.4/802.11 GatewayIFAC-PapersOnLine, 2016
- Application on Evaporative Cool Technique in Garment Workshop in Hot-humid AreaProcedia Engineering, 2015
- Assessment of indoor air quality and thermal comfort in Portuguese secondary classrooms: Methodology and resultsBuilding and Environment, 2014
- An Energy-Efficient Smart Comfort Sensing System Based on the IEEE 1451 Standard for Green BuildingsIEEE Sensors Journal, 2014
- Indoor Air Quality and Thermal Comfort in Naturally Ventilated Low-Energy Residential Houses2012
- Comfort climate evaluation with thermal manikin methods and computer simulation modelsIndoor Air, 2003
- Pulmonary Function of Workers Exposed to Ammonia: A Study in the Eastern Province of Saudi ArabiaInternational Journal of Occupational and Environmental Health, 2001