An UHF RFID Energy-Harvesting System Enhanced by a DC-DC Charge Pump in Silicon-on-Insulator Technology
- 24 April 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 23 (6) , 315-317
Abstract
An RF-DC converter enhanced by a DC-DC voltage booster in silicon-on-insulator technology for UHF radio frequency identification (RFID) energy harvesting is presented in this letter. When the received RF power level is -14 dBm or higher, the system, fabricated on an FR4 substrate using off-the-shelf low-cost discrete components and connected to a flexible dipole antenna, is able to produce 2.4 V DC voltage to power general-purpose electronic devices. As a simple proof of concept, a device comprising microcontroller, temperature sensor, and EEPROM is considered in this work. The experimental results demonstrate the capability of the system to autonomously perform temperature data logging up to a distance of 5 m from a conventional UHF RFID reader used as an RF energy source.Keywords
All Related Versions
This publication has 9 references indexed in Scilit:
- Listening to Tags: Uplink RFID Measurements With an Open-Source Software-Defined Radio ToolIEEE Transactions on Instrumentation and Measurement, 2012
- A battery-less, energy harvesting device for long range scavenging of wireless power from terrestrial TV broadcasts2012
- MONOPOLE-BASED RECTENNA FOR MICROWAVE ENERGY HARVESTING OF UHF RFID SYSTEMSProgress in Electromagnetics Research C, 2012
- Inkjet Printed, Self Powered, Wireless Sensors for Environmental, Gas, and Authentication-Based SensingIEEE Sensors Journal, 2011
- Power management circuit for wireless ubiquitous sensor nodes powered by scavenged energyElectronics Letters, 2009
- RF energy scavenging system utilising switched capacitor DC-DC converterElectronics Letters, 2009
- Design of an RFID-Based Battery-Free Programmable Sensing PlatformIEEE Transactions on Instrumentation and Measurement, 2008
- Efficient Far-Field Radio Frequency Energy Harvesting for Passively Powered Sensor NetworksIEEE Journal of Solid-State Circuits, 2008
- Power Harvester Design for Passive UHF RFID Tag Using a Voltage Boosting TechniqueIEEE Transactions on Microwave Theory and Techniques, 2007