Flexible thermoplastic composite of Polyvinyl Butyral (PVB) and waste of rigid Polyurethane foam
Open Access
- 1 April 2015
- journal article
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 25 (2) , 175-180
Abstract
This study reports the preparation and characterization of composites with recycled poly(vinyl butyral) (PVB) and residue of rigid polyurethane foam (PUr), with PUr contents of 20, 35 and 50 wt %, using an extruder equipped with a Maillefer single screw and injection molding. The components of the composites were thermally characterized using differential scanning calorimetry (DSC) and thermogravimetry. The composites were evaluated by melt flow index (MFI), tensile and hardness mechanical tests and scanning electron microscopy (SEM). Tg determined by DSC of PVB sample (53 °C) indicated the presence of plasticizer (Tg of pure PVB is 70 °C). MFI of the composites indicated a viscosity increase with the PUr content and, as the shear rate was held constant during injection molding, higher viscosities promoted higher shear stresses in the composites, thereby causing breaking or tearing of the PUr particles. The SEM micrographs showed low adhesion between PVB and PUr and the presence of voids, both inherent in the rigid foam and in the interphase PVB-PUr. The SEM micrographs also showed that PVB/PUr (50/50) composite exhibited the smallest particle size and a more homogeneous and compact structure with fewer voids in the interface. The stiffness of the composites increases with addition of the PUr particles, as evidenced in the mechanical tests.Keywords
This publication has 16 references indexed in Scilit:
- Influência do uso do poliol reciclado obtido pela glicólise na preparação da espuma rígida de poliuretanoPolímeros, 2012
- Síntesis de espumas rígidas de poliuretano obtenidas a partir de aceite de castor y poliglicerol empleando calentamiento por microondasPolímeros, 2011
- Polymer toughening using residue of recycled windshields: PVB film as impact modifierEuropean Polymer Journal, 2008
- Methods for polyurethane and polyurethane composites, recycling and recovery: A reviewReactive and Functional Polymers, 2007
- Poly(styrene‐co‐butyl acrylate)‐Brazilian Montmorillonite Nanocomposites, Synthesis of Hybrid Latexes via Miniemulsion PolymerizationMacromolecular Symposia, 2006
- Improving chemical recycling rate by reclaiming polyurethane elastomer from polyurethane foamPolymer Degradation and Stability, 2006
- The characterization of polyvinyl butyral by thermal analysisThermochimica Acta, 2002
- Blends of polypropylene with poly(vinyl butyral)Journal of Applied Polymer Science, 2001
- Properties of compositions based on post-consumer rigid polyurethane foams and low-density thermoplastic resinsPolymer International, 2000
- Solubility of antioxidants in poly(vinyl butyral)Polymer Degradation and Stability, 1998