Numerical Evaluation of Rutting in Rubberized Asphalt Mixture Using Finite Element Modeling Based on Experimental Viscoelastic Properties
Authors:
- 1 June 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (6)
Abstract
Asphalt pavement rutting is one of the most commonly observed pavement distresses, and crumb rubber can decrease this distress. This paper uses the two-dimensional (2D) and three-dimensional (3D) finite-element method (FEM) to simulate wheel track testing to predict rut depth in rubberized and conventional asphalt mixes and links these behaviors to an accelerated performance testing tool. Dynamic creep tests are performed on different specimens to obtain material parameters of the creep power law that is then used to model the viscoelastic behavior of asphalt mixtures. The Hamburg wheel rut tester (HWRT) is used for asphalt laboratory-accelerated rutting resistance testing and for calibration of material parameters developed in a dynamic creep test. Finite-element software is used to simulate HWRT and outputs of models are compared with the experimental observations. The results show that the difference between the predicted rut depth in 2D and 3D modeling and the measured rut depth in the laboratory is 13.5 and 11.5%, respectively. Furthermore, the rubberized asphalt mixture has 36% less rut depth than the conventional asphalt mixture.Keywords
This publication has 21 references indexed in Scilit:
- Rutting performance of rubberized porous asphalt using Finite Element Method (FEM)Construction and Building Materials, 2016
- Experimental investigation of bituminous plug expansion joint materials containing high content of crumb rubber powder and granulesMaterials & Design (1980-2015), 2012
- EVALUATION OF RUTTING DEPTH IN FLEXIBLE PAVEMENTS BY USING FINITE ELEMENT ANALYSIS AND LOCAL EMPIRICAL MODELAmerican Journal of Engineering and Applied Sciences, 2012
- Mechanistic analysis of ST and SBS-modified flexible pavementsConstruction and Building Materials, 2009
- Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep testConstruction and Building Materials, 2009
- The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavementsConstruction and Building Materials, 2008
- Micromechanical Modeling of the Viscoelastic Behavior of Asphalt Mixtures Using the Discrete-Element MethodInternational Journal of Geomechanics, 2007
- On the characterization of flexible pavement rutting using creep model-based finite element analysisFinite Elements in Analysis and Design, 2004
- INTERACTION OF ASPHALT WITH GROUND TIRE RUBBERPetroleum Science and Technology, 1999
- Numerical approach of visco-elastoplastic analysis for asphalt mixturesComputers & Structures, 1998