Experimental Investigation of the Melt Shear Viscosity, Specific Volume and Thermal Conductivity of Low-Density Polyethylene/Multi-Walled Carbon Nanotube Composites Using Capillary Flow
Open Access
Abstract
Understanding the flow behavior of polymer/carbon nanotube composites prior to melt processing is important for optimizing the processing conditions and final product properties. In this study, the melt shear viscosity, specific volume and thermal conductivity of low-density polyethylene (LDPE) filled with multi-walled carbon nanotubes (MWCNTs) were investigated for representative processing conditions using capillary rheometry. The experimental results show a significant increase in the melt shear viscosity of the LDPE/MWCNT composite with nanotube loadings higher than 1 wt.%. Upon increasing shear rates, the composites flow like a power-law fluid, with a shear-thinning index less than 0.4. The specific volume decreases with increasing pressure and nanotube loading, while the pVT transition temperature increases linearly with increasing pressure. The thermal conductivity of the LDPE/MWCNT composite is nearly independent of nanotube loading up to the thermal percolation threshold of 1 wt.% and increases linearly with further increases in nanotube loading, reaching 0.35 W/m·K at 5 wt.%. The Carreau–Winter and Cross viscosity models and Tait equation, respectively, are able to predict the shear viscosity and specific volume with a high level of accuracy. These results can be used not only to optimize processing conditions through simulation but also to establish structure–property relationships for the LDPE/MWCNT composites.Keywords
This publication has 65 references indexed in Scilit:
- Thermal Conduction in Aligned Carbon Nanotube–Polymer Nanocomposites with High Packing DensityACS Nano, 2011
- Influence of surface treatment of multiwall carbon nanotubes on the properties of polypropylene/carbon nanotubes nanocompositesPolymers for Advanced Technologies, 2010
- Microstructure and Properties of Polypropylene/Carbon Nanotube NanocompositesMaterials, 2010
- Effects of polymer molecular weight and filler particle size on flow behavior of wood polymer compositesPolymer Composites, 2008
- Polyethylene multiwalled carbon nanotube compositesPolymer, 2005
- Influence of cooling rate on pVT‐data of semicrystalline polymersJournal of Applied Polymer Science, 2001
- Viscoelastic and pressure-volume-temperature properties of poly(vinylidene fluoride) and poly(vinylidene fluoride)-hexafluoropropylene copolymersJournal of Applied Polymer Science, 2001
- Modifying the tait equation with cooling‐rate effects to predict the pressure–volume–temperature behaviors of amorphous polymers: Modeling and experimentsPolymer Engineering & Science, 1996
- Origin of nonlinearities in the Bagley plots of thermotropic copolyestersJournal of Rheology, 1996
- Pressure–volume–temperature relationships of solid and molten polypropylene and poly(butene-1)Journal of Applied Polymer Science, 1979